Patch Common Parameters - Roland SH-201 Owner's Manual

Parameter list

PATCH COMMON parameters

Parameter Value
PATCH (Up to 12 characters)
NAME
PATCH 0–127
LEVEL
TONE -63 (LOWER)–
BALANCE +63 (UPPER)
PATCH 5–300 (BPM)
TEMPO
KEYBOARD
KEYBOARD SINGLE, DUAL,
MODE SPLIT
KEYBOARD UPPER, LOWER
PART
SPLIT A0–C8
POINT
POLY/SOLO
LOWER SOLO+LEGATO,
SOLO, POLY
UPPER SOLO+LEGATO,
SOLO, POLY
PITCH BEND RANGE
LOWER 0–24
UPPER 0–24
OCTAVE SHIFT
LOWER -3– +3
UPPER -3– +3
PORTAMENTO
LOWER OFF, ON
TIME 0–127
UPPER OFF, ON
TIME 0–127
64
Explanation
You can assign a name to the patch.
Available characters/symbols:
space, A–Z, a–z, 0–9, ! " # $ % & ' ( ) * + , - . / : ; < = >
? @ [ \ ] ^ _ ` { | }
Specifies the volume of the patch.
Adjusts the volume balance of the UPPER tone and the
LOWER tone.
This is the tempo value stored for each patch.
This will be the tempo of the arpeggio, and the refer-
ence tempo used when you specify the LFO cycle in
terms of a note length (TEMPO SYNC, p. 62).
SINGLE: Either the UPPER tone or the LOWER tone
(not both) will sound.
DUAL: The UPPER tone and the LOWER tone will
sound together (p. 46).
SPLIT: The keyboard will be split into two regions that
play the UPPER and LOWER tone separately (p. 47).
Specifies which tone will be played from the keyboard
when KEYBOARD MODE is "SINGLE."
Specifies the note (key) at which the keyboard will be
split when KEYBOARD MODE is "SPLIT."
Turns solo and legato (p. 19) on/off for the LOWER tone.
SOLO+LEGATO: Solo and legato will both be on.
SOLO: Only solo will be on.
POLY: Both solo and legato will be off.
Turns solo and legato (p. 19) on/off for the UPPER tone.
Specifies the amount of pitch change that will occur for
the LOWER tone when the pitch bend lever (p. 18) is
moved all the way to left or right.
This is specified in semitone steps. The maximum
range is 24 semitones (2 octaves).
Specifies the amount of pitch change that will occur for
the UPPER tone when the pitch bend lever (p. 18) is
moved all the way to left or right.
This is specified in semitone steps. The maximum
range is 24 semitones (2 octaves).
Shifts the range of the LOWER tone up or down in steps
of one octave.
Shifts the range of the UPPER tone up or down in steps
of one octave.
Turns portamento (p. 19) on/off for the LOWER tone.
Specifies the time over which portamento is to change
the pitch of the LOWER tone.
Higher values will produce a longer (slower) transi-
tion to the pitch of the next note.
Turns portamento (p. 19) on/off for the UPPER tone
Specifies the time over which portamento is to change
the pitch of the UPPER tone.
Higher values will produce a longer (slower) transi-
tion to the pitch of the next note.
Panel operation
–
Hold down the CANCEL button and
turn the FX DEPTH knob
Hold down the CANCEL button and
turn the MIX/MOD BALANCE knob
Use the TEMPO buttons, or press the
TAP button three or more times at quar-
ter-note intervals of the desired timing
(p. 22, p. 26)
Press the DUAL/SPLIT button (p. 46)
Press the UPPER/LOWER buttons (p.
46)
1. Hold down the CANCEL button and
press the TAP button
2. Hold down the DUAL/SPLIT button
and press a key (p. 71)
3. Press the CANCEL button
Press the SOLO button (p. 19)
Press the SOLO button (p. 19)
1. Hold down the CANCEL button and
press the TAP button
2. Hold down the LOWER button and
press a key (C2–C4, p. 71)
3. Press the CANCEL button
1. Hold down the CANCEL button and
press the TAP button
2. Hold down the UPPER button and
press a key (C2–C4, p. 71)
3. Press the CANCEL button
Hold down the LOWER button and
press the OCT UP/DOWN buttons
Hold down the UPPER button and press
the OCT UP/DOWN buttons
Press the LOWER button, and then
press the PORTAMENTO button (p. 19)
Press the LOWER button, then hold
down the PORTAMENTO button and
press a NUMBER button (1–8) or turn
the TIME knob (p. 19)
Press the UPPER button, and then press
the PORTAMENTO button (p. 19)
Press the UPPER button, then hold
down the PORTAMENTO button and
press a NUMBER button (1–8) or turn
the TIME knob(p. 19)