Adding Depth And Spaciousness To The Sound (Effects); Edit Button; Fx On (Effect On) Button - Roland SH-201 Owner's Manual

Creating sounds
Adding depth and spaciousness to the sound
(EFFECTS)
You can use effects to add depth and spaciousness to the sound.
The SH-201 provides two effects; DELAY (modulation delay) and REVERB.
Effect types
• DELAY: This produces a delayed repeat like an echo. You can also add modulation to the delayed sound.
• REVERB: Adds the reverberation that is characteristic of a performance in a hall or room.
* You can change the speed and depth of the modulation applied to the delay sound (MODULATION RATE, MODULATION
DEPTH (p. 63)).

EDIT button

fig.FXEDIT-button
Use this button to specify whether you're editing DELAY or REVERB.
Press the button so the indicator for the effect you want to edit is lit.
Pressing the button toggles you between DELAY and REVERB.

FX ON (effect on) button

fig.FXON-button
This button specifies whether DELAY or REVERB will be used.
If you press this button so its indicator is lit, the corresponding effect will be on.
* You can turn on just DELAY or REVERB by itself, or turn both on simultaneously.
* The effect on/off setting is shared by the UPPER tone and LOWER tone (p. 46). If you want to apply
an effect to just one tone, turn the EFFECTS DEPTH knob (p. 45) all the way to the left for the tone to
which you don't want to apply the effect.
44