Lfo Parameters - Roland SH-201 Owner's Manual

Parameter list

LFO parameters

Parameter Value
LFO1
LFO SHAPE TRI, SIN, SAW, SQR, TRP,
S&H, RANDOM
TEMPO SYNC OFF, ON
Switch
TEMPO SYNC 16, 12, 8, 4, 2, 1, 3/4, 2/3, 1/2,
NOTE 3/8, 1/3, 1/4, 3/16, 1/6, 1/8,
3/32, 1/12, 1/16, 1/24, 1/32
RATE 0–127
KEY TRIGGER OFF, ON
DESTINATION 1 PITCH1, PW1, FILTER,
AUDIO-FIL
DEPTH 1 -63– +63
DESTINATION 2 PITCH2, PW2, AMP
DEPTH 2 -63– +63
FADE TIME 0–127
LFO2
SHAPE TRI, SIN, SAW, SQR, TRP,
S&H, RANDOM
TEMPO SYNC OFF, ON
Switch
TEMPO SYNC 16, 12, 8, 4, 2, 1, 3/4, 2/3, 1/2,
NOTE 3/8, 1/3, 1/4, 3/16, 1/6, 1/8,
3/32, 1/12, 1/16, 1/24, 1/32
RATE 0–127
KEY TRIGGER OFF, ON
DESTINATION 1 PITCH1, PW1, FILTER,
AUDIO-FIL
DEPTH 1 -63– +63
DESTINATION 2 PITCH2, PW2, AMP
DEPTH 2 -63– +63
FADE TIME 0–127
FADE TIME
Key-on
62
Explanation
Selects the LFO 1 waveform.
Synchronizes the LFO 1 RATE (modulation speed) to
the tempo of the arpeggiator or recorder.
Specifies the LFO 1 rate (modulation speed) in terms of
a note value.
Specifies the speed of LFO 1 modulation.
If this is "ON," LFO 1 will begin a new cycle the mo-
ment you press a key.
Specifies the parameter that will be modulated by LFO
1.
Specifies the depth of modulation that will be applied
to the parameter you selected for DESTINATION 1.
Specifies the parameter that will be modulated by LFO
1.
Specifies the depth of modulation that will be applied
to the parameter you selected for DESTINATION 2.
Specifies the time until the maximum LFO 1 amplitude
is reached.
Selects the LFO 2 waveform.
Synchronizes the LFO 2 RATE (modulation speed) to
the tempo of the arpeggiator or recorder.
Specifies the LFO 2 rate (modulation speed) in terms of
a note value.
Specifies the speed of LFO 2 modulation.
If this is "ON," LFO 2 will begin a new cycle the mo-
ment you press a key.
Specifies the parameter that will be modulated by LFO
2.
Specifies the depth of modulation that will be applied
to the parameter you selected for DESTINATION 1.
Specifies the parameter that will be modulated by LFO
2.
Specifies the depth of modulation that will be applied
to the parameter you selected for DESTINATION 2.
Specifies the time until the maximum LFO 2 amplitude
is reached.
DEPTH
time
Panel operation
Press the SHAPE buttons
(p. 40)
Press the TEMPO SYNC
button (p. 41)
Press the TEMPO SYNC
button and then turn the
RATE knob (p. 41)
Turn the RATE knob (p. 41)
Hold down the LFO 1 but-
ton and press the TEMPO
SYNC button
Press the DESTINATION 1
button (p. 42)
Turn the DESTINATION 1
DEPTH knob (p. 42)
Press the DESTINATION 2
button (p. 43)
Turn the DESTINATION 2
DEPTH knob (p. 43)
Hold down the LFO 1 but-
ton and turn the RATE knob
Press the SHAPE buttons
(p. 40)
Press the TEMPO SYNC
button (p. 41)
Press the TEMPO SYNC
button and then turn the
RATE knob (p. 41)
Turn the RATE knob (p. 41)
Hold down the LFO 2 but-
ton and press the TEMPO
SYNC button
Press the DESTINATION 1
button (p. 42)
Turn the DESTINATION 1
DEPTH knob (p. 42)
Press the DESTINATION 2
button (p. 43)
Turn the DESTINATION 2
DEPTH knob (p. 43)
Hold down the LFO 2 but-
ton and turn the RATE knob