Before You Play; Getting Ready To Play; Connecting The Speaker Cable; Connecting The Pedal Cord - Roland HP-207 Owner's Manual

Before You Play

Getting Ready to Play

Connecting the Speaker Cable

Plug the speaker cable extending from the stand into
the SPEAKER connector located at the rear of the
HP207's bottom panel.
Pay attention to the shape of the speaker cable's
connector, and insert it until you hear it click securely
into place.
fig.SpeakerCable.eps

Connecting the Pedal Cord

Plug the pedal cord extending from the stand into
the Pedal connector located at the rear of the
HP207's bottom panel.
fig.PedalCord.eps
16

Connecting the Power Cord

1.
Make sure that the [Power] switch located at
the left side of the front panel is off (in the
upward position).
fig.PowerOff-e.eps
Upward
position
OFF
2.
Turn the [Volume] knob all the way toward the
left to minimize the volume.
3.
Connect the included power cord to the AC
INLET located at the rear of the bottom panel.
4.
Plug the other end of the power cord into an
AC outlet.
fig.PowerCord.eps
You must use the power cord included with the
NOTE
HP207.
3
4