Adding Spatial Depth To The Sound (3D Sound Control) - Roland HP-207 Owner's Manual

Adding spatial depth to the sound (3D Sound Control)

The HP207 provides a "3D Sound Control" function, which creates the sense of spatial
depth that you experience when playing a grand piano. This function adds the natural
resonance and spaciousness that are characteristic of an acoustic piano.
fig.Panel-3D-e.eps
1.
Press the [3D] button so it's lit.
The 3D Sound Control function will be turned on, and the sound will have more spatial depth.
2.
While holding down the [3D] button, use the [-] [+] buttons to adjust the
spatial depth of the sound.
You can adjust the spatial depth over four levels.
Increasing the value will increase the spatial depth of the sound.
fig.d-3DType.eps
NOTE
NOTE
NOTE
Turning off 3D Sound Control
1.
Press the [3D] button so its light is turned off.
You can use the Memory Backup function to store this setting in internal memory (p.
86).
You can change the way in which the 3D Sound Control function is applied (p. 84).
If the Piano Designer screen is displayed, 3D Sound Control cannot be turned on/off.
3D Sound Control does not affect the sound from the Input jack or the sound of external
devices connected to the MIDI Out connector.
When you turn Twin Piano on, 3D Sound Control will be turned off.
Performing
31