Roland HP-207 Owner's Manual page 63

3.
Press the [
The [
recording standby mode.
If you decide not to record, press the [
The button of the track to be recorded will flash.
4.
Press the button of each track you don't want to record, turning off its
illumination.
Recording
5.
Press the [
After two measures of count sound, recording begins.
Recording starts when you start playing the keyboard (without pressing the [
case, a count is not sounded.
When recording begins, the [
6.
To stop recording, press the [
Recording an additional part
7.
In the song select screen, press the [
You will return to the beginning of the recorded performance.
8.
Press the [
The following screen will appear.
fig.d-OverRec.eps
If you want to erase the previously recorded performance and re-record a new performance, press
the [
9.
If you want to record another track, press the [
The following screen will appear.
fig.d-OverRec2.eps
] button.
] button will light, the [
You can record to only one track button at a time.
] button.
During the count-in, the count measure is indicated in the lower right of the display as
"-2" then "-1."
] button.
] button.
] button indicator will flash, and the HP207 will enter
] button once again.
] button and [ ] button will light.
] button.
] button.
Recording
] button). In this
] button.
61