Roland HP-207 Owner's Manual page 53

4.
Press the [-] or [+] button to select "All Song."
fig.d-AllSongPlay.eps
5.
Press the [Piano Designer] button twice.
You will return to the tone select screen.
Specifying the First Song
6.
Press the [Song] button so it's lit.
7.
Press the [-] or [+] button to select the song.
8.
Press the [
The songs will play successively, starting with the selected song.
When the last song finishes playing, playback will return to the first song and then continue.
If you're playing in All Song Play mode, a symbol to indicate this is shown in the upper right of
the screen.
fig.AllSong-e.eps
To Stop Playback
9.
Press the [
The next time you press the [
stopped.
] button so it's flash.
The songs in internal memory will play consecutively if an internal memory song is
selected, and the songs in USB memory will play consecutively if a USB memory song
is selected.
] button so its illumination is turned off.
You can use the Memory Backup function to store this setting in internal memory (p.
86).
By holding down the [Song] button and pressing the [
songs regardless of the Song Play mode.
All Song Play
] button, playback will resume from the point at which you
Playing Back Songs
] button, you can play all
51