Changing The Manual Percussion Sets - Roland AT900 Music Atelier Owner's Manual

Changing the Manual Percussion Sets

You can choose the type of Manual Percussion Set. When you change the
Manual Percussion Set, the sound played by each of the 15 lowest notes of
the Lower keyboard will change.
Immediately after the power is turned on, the PERC SET1 drum set will sound.
1.
Press the [Manual Perc] button (indicator lights).
The Manual Percussion screen will be displayed for several seconds.
fig.01-36-1.eps
2.
While the Manual Percussion screen is displayed, touch a
manual percussion set name in the screen.
The [Manual Perc] button indicator will begin to flash.
You can select from 14 different Manual Percussion Sets;
PERC SET 1, PERC SET 2, PERC SET 3, ORCHESTRA SET, ORCHESTRA SET2,
LATIN SET, ASIAN SET, VOICE PHRASE, VOICE PHRASE 2, VOICE PHRASE 3,
SFX SET, SFX SET 2, JAPANESE SET, JAPANESE SET 2
3.
Press the [Manual Perc] button once again.
The [Manual Perc] button indicator will change from blinking to lit, and your
choice of drum set will be finalized.
Manual Percussion Set
Selecting and Playing Sounds
Refer to "Manual Percussion
List" (Appendix: separate
booklet) for details on which
percussion sound will be
played by each note.
NOTE
The Manual Percussion screen
will automatically close after
several seconds if you do not
touch the screen to select a
manual percussion set. If you
wish to change the manual
percussion set, you must select
a manual percussion set quickly
while the manual percussion
screen is displayed.
You can also confirm the
Manual Percussion set by
touching <Exit> in the Manual
Percussion screen.
You can also play the lower
manual to confirm the manual
percussion set.
79