Erasing A Performance Song (Song Clear); Changing The Name Of A Performance Song (Rename) - Roland AT900 Music Atelier Owner's Manual

Recording/Playing Back What You Play
Erasing a Performance Song
(Song Clear)
If you wish to discard your recording and re-record from the
beginning, or if you wish to record a new performance, you
must erase the previously-recorded data.
1.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04-2.eps
2.
Touch < > (Utility).
The Utility screen appears.
fig.07-22-2.eps
3.
Touch <Song Clear>.
The following message, asking you to confirm your
choice, will be displayed.
fig.E-62.eps
If you touch <Cancel>, the performance data will not be
erased, and you will return to the Rec/Play screen.
4.
If you touch <OK>, the performance data will
be erased.
178
You can also use the following method to open the
Song Clear screen.
1.
Touch <Quick Guide> on the Main screen
to display the Quick Guide screen.
2.
Press the [Song] button.
The Song Clear screen appears.
Changing the Name of a
Performance Song (Rename)
A name is automatically assigned to a performance song that
you record. However, at some point you may wish to change
the name to something more meaningful.
1.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04-2.eps
2.
Touch < > (Utility).
The Utility screen appears.
fig.07-22-2.eps