Assigning A Name To A Registration Set - Roland AT900 Music Atelier Owner's Manual

Assigning a Name to a Registration Set

When saving Registration sets, names like "Factory Reg." will be assigned by
default, but you can assign a name that will help you later to identify the
contents of the Registration set.
1.
Touch <Registration> on the Main screen.
The Registration Load screen appears.
fig.03-05.eps
2.
Touch <go to Save>.
The Registration Save screen appears.
fig.03-09-3.eps
3.
Touch <
The Utility screen appears.
fig.03-10-2.eps
> (Utility).
Using the Registration Buttons
111