Using The Mixer (Mixer) - Roland TD-9 Owner's Manual

Using the Mixer (MIXER)

Adjusting the volume and pan (stereo position) of individual
pads/pedals.
1. Press [KIT]-[F1] (INST).
The "INST" screen appears.
2. Press [F2] (MIXER).
3. Press [F1]–[F3] to select the item you want to edit.
Screen Parameter
[F1] (VOLUME)
VOLUME
[F2] (PAN)
PAN
[F3] (KITVOL)
Kit Volume
Pedal HH Volume
XStick Volume
XStick Threshold
Setting this to a high value makes it easier
to get cross stick sounds. When set to
"0," playing cross stick will produce the
open rim shot sound.
* A very high value may cause the cross
stick to sound as when playing a rim
shot.
If you pressed [F1] or [F2]
4-1. Hit the desired pad or use CURSOR [
select a pad.
4-2. Use CURSOR [
If you pressed [F3]
4. Use CURSOR [
5. Use [+/-] or [VALUE] to edit the value.
6. Press [EXIT] several times to return to the "DRUM
KIT" screen or just press [KIT].
Value
0–100
L15–CTR–R15
0–100
0–100
0–100
0–127
High
Low
Soft
Creating a drum kit
] [
] [ ] to select HEAD or RIM.
] [ ] to select a parameter.
Description
Volume of each pad
Pan position of each pad
Volume of the entire drum kit
Volume of the hi-hat's foot closed sound
Volume of cross stick sound
Determines the velocity/dynamic at
which the cross-stick and open rim shot
sound will switch.
Rim Shot
Sound
Cross Stick
Sound
Hard
Cross Stick Threshold (0–127)
] to
Striking
force
27