Chapter 3. Mixer Settings; Mixer Parameters [Mixer]; Using Group Faders To Edit (Mix Edit) - Roland TD-12 Owner's Manual

Chapter 3. Mixer Settings

Mixer Parameters [MIXER]

Here you can adjust the volume, pan, etc.
fig.03-001_70
1. Press [MIXER].
[MIXER] lights.
2. Use [F1]–[F4] or [CURSOR (up/down)] to select
the parameter.
3. Use [CURSOR (left/right)] or [RIM] to select the
instrument you wish to set.
You can also select the instrument by striking a pad.
4. Use [+/-], [VALUE], or [CURSOR (up/down)] to
make the setting.
Parameter Value
[F1 (VOLUME)]
Volume 0–127
[F2 (PAN)]
Pan L15–CTR–
R15
[F3 (MIN VOL)]
Minimum 0–10
Volume
[F4 (KIT VOL)]
Kit Volume 0–127
Pedal HH 0–127
Volume
XStick Vol- 0–127
ume
* Pressing [F5 (H & R)] in the [F1 (VOLUME)], [F2 (PAN)], or
[F3 (MIN VOL)] setting screen, you can choose to set the head
and rim simultaneously or individually.
5. Press [EXIT] to return to the "DRUM KIT"
screen.
Description
Volume of each trigger input
Pan of each trigger input
Minimum volume of each
trigger input
(This is used to narrow the
dynamic range.)
Volume of the entire drum
kit
Volume of the hi-hat's foot
closed sound
Volume of cross stick sound

Using Group Faders to Edit (MIX EDIT)

You can use the GROUP FADERS to make adjustments.
fig.03-002_70
1. Press [INST] and [MIXER] simultaneously.
[MIXER] flashes.
You can change the function of the faders by holding
down [SHIFT] and pressing [MIXER]. When lower
indicator is lit, you can adjust the volume of AUX 1 and
AUX2.
2. Press [F1]–[F3] to select the parameter.
3. Move the fader which corresponds to the
TRIGGER INPUT you wish to adjust.
* You can also use [+/-], [VALUE], or [CURSOR (up/down)].
Parameter Value
[F1 (VOLUME)]
Volume 0–127
[F2 (AMB SND)]
AMB SEND 0–127
LEVEL
[F3 (MFX SND)]
MFX SEND 0–127
LEVEL
* These settings are always common to the head and rim.
4. Press [EXIT] or [FADER] to return to the "DRUM
KIT" screen.
* After pressing [EXIT] or [FADER], the values for the
[GROUP FADERS] sliders may not reflect the actual volume
of the sound assigned to that fader. Be sure to move the faders a
bit before making your setting.
Description
Volume of each trigger input
Send level to the ambience for
each trigger input
Send level to the multi-effects
for each trigger input
39