Honeywell Touchpoint Pro Technical Handbook page 186

22.4.1 Approved Components
The following system components have been tested and approved by DEKRA Exam
CCB & CCB-R
COB
Local HMI
CM Motherboard
Bus Interface Board
Backplane 10 Way
Backplane 9 Way
Backplane 7 Way
Backplane 5 Way
19" Rack (with HMI)
19" Rack (remote)
Wall Mount Remote (Small) TPPR-V-1215
AIM mA
AIM mV
DIM
ROM
RCM
Note: The PC configuration software has not been assessed by DEKRA Exam. If this software is used to configure the
TPPR system the configuration must be verified before use, for example by confirming the printed system configuration and
channel configuration reports.
Note: The power supply units have not been assessed by DEKRA Exam. Any suitable power supply may be used.
Part. No. 2400M2501_6
CERTIFICATION
TPPR-V-2120
TPPR-P-2110
TPPR-V-0852
TPPR-P-2100
TPPR-V-2130
TPPR-P-0540
TPPR-P-0530
TPPR-P-0525
TPPR-P-0520
TPPR-V-0602
TPPR-V-0612
TPPR-V-1000
TPPR-V-1010
TPPR-V-1030
TPPR-V-1040
TPPR-V-1050
179
Touchpoint Pro
Technical Handbook