Honeywell Touchpoint Pro Technical Handbook page 16

2.2.2 Equipment Rating Labels (Hazardous Locations)
The following labels are fixed in prominent positions on the enclosure and on relevant modules. It is the user's responsibility
to check individual rating plates before installation and to ensure that specifications are not exceeded during operation.
Exceeding the approved ratings invalidates product certification and the manufacturers' warranties.
Some controllers may not have the label shown in Figure 6, but will have a label similar to the one in Figure 7.
Key
1
Manufacturer
2
Part Numbers
3
Description
4
ID and Serial Number
5 Modification State
6 Safety Warnings
7 Ingress Ratings
8 Manufacturer Details
9 Equipment Title
10 Limits for Voltage / Power / T
CE Mark and Notified Body for
11
Production Supervision
SIRA ATEX / IECEx Certificate
12
Numbers
ATEX / IECEx Hazardous Area
13
Certification Details
US/Canadian Hazardous Location
14
and Zone Certification Details
CSA Monogram Canada and USA
15
Certified
Manufacturer's Master Contract
16
Number and Canadian / US
Performance Identification
Note: The CE mark and Notified Body number 0518 shown on product labels does not apply to Type 'n' approval.
Note: Similar labels appear on the Modules and the Backplanes.
Part. No. 2400M2501_6
SAFETY
amb
Figure 6. Example of a Typical System Rating Label
Figure 7. Typical TPPR Product Label
9
Touchpoint Pro
Technical Handbook