Power Cable - Stihl E 140 Service Manual

4. Removing and Installing Electrical Components
4.1 Connecting Cord
Important: The electrical safety of
the saws should be checked after
every repair by performing a high-
voltage insulation test. Tests of
this kind may only be carried out
by electricians or specially trained
personnel.
Always unplug the machine from
the mains supply.
- Remove the quick chain
tensioner, if fitted - see 7.3.
•
Unscrew nut.
- Remove the chain sprocket
cover.
6
1
1
Models with quick chain
tensioner
•
Take out screws (1).
•
Remove the spiked bumper (2).
All models
- Remove the chain sprocket -
see 6.1.
•
Unscrew oil filler cap and remo-
ve together with cap retainer.
•
Take out the screws.
- Remove the handle housing.
2
•
Take out the O-ring.
1
- Place a socket (e.g. 19mm)
under the handle housing so that
it supports the bearing bush from
outside.
•
Use drift (1) 1111 893 4700 to
press needle sleeve out of
bearing bush.
•
Take out the screws.
- Remove the strain relief cable
clamp.