9.
CHAIN LUBRICATION
9.1
Oil Tank
- Remove the handle housing -
see 4.1.
•
Remove the oil tank and pull it
off the oil strainer at the same
time.
•
Remove the sealing ring from
the oil tank.
•
Take grommet out of the oil tank.
Install in the reverse sequence.
9.2
Oil Strainer
- Remove the oil tank -
•
Pull the oil strainer off the stub.
- Clean the oil strainer, check it for
damage and fit a new one if
necessary.
Install in the reverse sequence.
9.3
see 9.1.
- Remove the handle housing -
see 4.1.
•
Pull the spur gear out of the oil
pump.
•
Remove washer if it is still
sticking to the spur gear. If not,
take the washer out of the oil
pump.
•
Take out the screws.
Oil Pump
21