7.3
Quick Chain Tensioner
3
•
Pull out hinged handle (1) of
wingnut (2).
•
Unscrew the wingnut and
remove the chain sprocket
cover (3).
•
Ease the wingnut out of the
chain sprocket cover.
- Push the wingnut into the chain
sprocket cover until it snaps into
position.
18
8.
CHAIN BRAKE
8.1
Removal
2
1
- Remove the gear housing -
see 5.2.
- Remove brake drum if necessary
-
see 5.4.
•
Carefully pull the switch lever off
the pivot.
•
Disconnect brake rod from the
pawl.
•
Pry the pawl out of the switch
lever.
•
Take the torsion spring off the
pawl.
Install in the reverse sequence.
•
Check installed position of
torsion spring.