Chain Brake Switch - Stihl E 140 Service Manual

•
Pull off the terminal.
•
Pull overload circuit breaker out
of the motor housing.
Install in the reverse sequence.
•
Use new wire end ferrule to join
the wire from the switch and
capacitor and push into the retai-
ners in the motor housing.
4.5

Chain Brake Switch

- Remove the handle housing -
see 4.1.
•
Remove the wires from the
brake switch terminals.
1
2
•
Lift snap hook (1) a little and
then pull out the chain brake
switch (2).
Install in the reverse sequence.
9