General Power Tool Safety Warnings - Stihl MSA 160.0 C Instruction Manual

27 General Power Tool Safety Warnings

tion: EN 55014-1, EN 55014-2, EN 62841-1, and
EN 62841-4-1.
The type examination was carried out by: Inter‐
tek Testing & Certification Ltd, Academy Place,
1-9 Brook Street, Brentwood, Essex, CM14 5NQ,
United Kingdom
– Certification number: UK-MCR-0124
The measured and guaranteed sound power lev‐
els were determined in accordance with the UK
regulation Noise Emission in the Environment by
Equipment for use Outdoors Regulations 2001,
Schedule 8.
MSA 160.0 C
– Measured sound power level: 96 dB(A)
– Guaranteed sound power level: 98 dB(A)
MSA 200.0 C
– Measured sound power level: 96 dB(A)
– Guaranteed sound power level: 98 dB(A)
MSA 220.0 C
– Measured sound power level: 102 dB(A)
– Guaranteed sound power level: 104 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG.
The year of manufacture, country of manufacture
and serial number are indicated on the chainsaw.
Waiblingen, 2022-09-30
ANDREAS STIHL AG & Co. KG
pp
Robert Olma, Vice President, Regulatory Affairs
& Global Governmental Relations
27 General Power Tool Safety
Warnings
27.1 Introduction
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 standard for hand-held motor-oper‐
ated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding
an electric shock given under "Electrical Safety"
do not apply to STIHL cordless products.
0458-024-9801-A
WARNING
■ Read all safety warnings, instructions, illustra‐
tions and specifications provided with this
power tool. Failure to follow all instructions lis‐
ted below may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
The term "electric power tool" in the safety warn‐
ings refers to mains-operated (corded) power
tools or battery-operated (cordless) power tools.
27.2 Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
27.3 Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed (groun‐
ded) power tools.Unmodified plugs and
matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entan‐
gled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location
f)
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
English
61