Effect Of Seasonal Changes - Mira Elite QT Installation & User Manual

Please note when altering the shower temperature...
CAUTION! Altering the temperature control rapidly can cause the water temperature to
become briefly hotter or colder than required. For best results, adjust the temperature control
a small amount and allow the temperature to stabilise. Continue to adjust until a comfortable
showering temperature is reached.
increase the power setting while standing in the water flow. Avoid changing the
DO NOT
power setting when the shower is in use, this can cause a large increase or decrease in
water temperature.
DO NOT switch the shower off and back on while standing in the water flow.
shower off/on may result in unstable water temperatures. Always ensure the temperature
has stabilised before re-using the shower.
The shower has a high performance pump installed, which has been acoustically designed for
quieter performance, but will produce some noise during operation. Pump tone may change
when altering temperature position.

Effect of Seasonal Changes

The temperature of the mains water feed to the cistern is not constant throughout the year, i.e.
cooler during winter, warmer during summer. To maintain the desired showering temperature,
adjust the power and temperature controls accordingly. The shower flow rate will adjust
automatically.
For a cold shower select low.
For a summer warm shower select eco / high.
For a winter warm shower select high.
Adjust the power and temperature controls as required.
Flow rate will reduce when temperature control is increased.
HOT
COLD
21
Cycling the
1265606-W2-A