Table of Contents
Advertisement
8
Showerhead
Assembly
Feed the hose through the retaining ring and screw to both the showerhead
and shower unit. Use the washers supplied to seal the connections. Place the
showerhead assembly into the clamp bracket assembly and check the operation.
Turn the water supply back on.
Commissioning
Follow this procedure to check the function and performance before using the shower for the
first time. Make sure that all users are familiar with the operation of the shower. This
guide is the property of the homeowner.
1
Turn power control to low.
Turn temperature control to full cold.
1265606-W2-A
Clamp Bracket
Assembly
2
Switch electrical supply on.
18
Hide quick links:
Advertisement
Table of Contents
