Table of Contents
Advertisement
4
Fit the slide bar supports over the
mounting brackets and adjust the slide
bar vertically. The slide bar should
extend equally at both ends.
6
Tighten the two slide bar clamping
screws no more than half a turn to
secure the slide bar supports to the
slide bar.
Caution! Overtightening these screws
will cause damage.
5
Remove the assembly, without moving
the supports on the slide bar.
7
Fix the slide bar at both ends with the
M4 screws supplied.
17
1265606-W2-A
Hide quick links:
Advertisement
Table of Contents
