Vitosol 100-FM/200-FM Installation, Operating and Service
Installing the Solar Collectors
Dimensions
a 18 " (481 mm)
b 75f" (1920 mm)
1. Use the base rails 2 as a drilling template.
Secure the base rails with gusset plate with circular
hole 4 at the top of the wall.
2. Secure the base rails with slotted gusset plate 5
at the bottom of the wall.
3. Secure retaining bracket qP to the bottom of all
collector supports 1; do not tighten the screws.
4. Secure the support brace qW onto the retaining
plates between the second and third, the fourth
and fifth collector supports 1 etc. Tighten all bolts.
Note: Use base rails 2 as a drilling template for the wall.
Installation on a Wall
27