Important Regulatory And Installation Requirements - Viessmann Vitosol 100-FM SV1F Installation, Operating And Service Instructions

Safety

Important Regulatory and Installation Requirements

Initial start-up
Initial start-up must be performed by a qualified heating
contractor. Completion of the Maintenance Record by
the heating contractor is also required.
Note: See the Maintenance Record located on page 46.
Working on the equipment
The installation, adjustment, service and maintenance of
this equipment must be done by a licensed professional
heating contractor who is qualified and experienced in the
installation, service and maintenance of hot water heating
systems. There are no user serviceable parts on this
equipment.
Note: Please carefully read this manual prior to attempting
start-up, maintenance or service. Any warranty is
null and void if these instructions are not followed.
For information regarding other Viessmann System
Technology componentry, please reference
documentation of the respective product.
Viessmann offers frequent installation and service
seminars to familiarize our partners with our
products. Please inquire.
Ensure main power supply to equipment, the heating
system, and all external controls has been deactivated.
Take precautions in all instances to avoid accidental
activation of power during service work.
Note: The completeness and functionality of field supplied
electrical controls and components must be verified
by the heating contractor. These include low
water cut-offs, flow switches (if used), staging
controls, pumps, motorized valves, air vents,
thermostats, etc.
Repair work
IMPORTANT
Repairing components which fulfil a safety function can
compromise the safe operation of your heating system.
Replace faulty components only with original Viessmann
replacement parts. Ancillary components, spare and wear
parts.
IMPORTANT
Replacement and wear parts which have not been tested
together with the solar system can compromise its
function. Installing non-authorized components and
non-approved modifications/conversion can compromise
safety and may infringe our warranty conditions.
For replacement, use only original Viessmann replacement
parts or those which are approved by Viessmann.
4
Vitosol 100-FM/200-FM Installation, Operating and Service
Instructing the system user
The installer of the system is responsible to ensure the
system operator/ultimate owner is made familiar with
the functioning of the system, its activation, and its
shut-down.
Note: The following topics must be covered:
Proper system operation sequence. Explain the
equipment. Demonstrate an emergency shut-down,
what to do and what not. Explain that there is no
substitute for proper maintenance to help ensure
safe operation.
Technical literature
Literature applicable to all aspects of the Vitosol 100-FM,
200-FM:
- Technical Data Manual
- Installation, Operating, Service and Instructions
- System Design Guidelines
Note: Leave all literature at the installation site and advise
the system operator/ultimate owner where the
literature can be found. Contact Viessmann for
additional copies.