Mitsubishi SD200U Service Manual page 70

8. Removal of COOLING FAN (POWER)
1. Remove the Front Grill following "1. Removal of FRONT
GRILL".
2. Remove the Top Case Assy following "2. Removal of
TOP CASE ASSY".
3. Remove the SIGNAL PCB ASSY and FORMATTER
PCB ASSY following "3. Removal of SIGNAL PCB
ASSY and FORMATTER PCB ASSY".
4. Remove the two (a) screws and the Fan Holder as
shown in Fig. 3-7.
5. Remove the two (b) screws and the Cooling Fan
(Power) as shown in Fig. 3-7.
Cooling Fan (Power)
a x1
Fan Holder
- 12 -
a x7
OPTICAL UNIT
Fig. 3-6-2
a x1
b x2
Fig. 3-7