Installation; Unpacking And Inspection; Connecting The Vt Plus Hf - Fluke VT Plus HF Operator's Manual

1. Unpacking and Inspection

2. Connecting the VT PLUS HF

3. Attaching the Printer Cable
Unpacking and Inspection
1.
Before unpacking the VT PLUS HF, visually inspect the shipping box for damage.
• If no damage is evident, unpack the VT PLUS HF and use the checklist below
to ensure that you have received the tester's accessories. Save the foam inserts
and shipping box.
• If the shipping box is damaged, unpack the tester and inspect it for visible
dents and scratches.
If the instrument is damaged, notify the carrier and your distributor representative. Keep
the shipping cartons and packing materials for the carrier's inspection. Call a Fluke
Biomedical service representative to arrange for repair or replacement of your instrument
without waiting for the claim against the carrier to be settled.
After unpacking the VT PLUS HF, use the following checklist to ensure that you have
received everything. In addition to the tester and this manual, you should have:
⇒ A power cable (Fluke Biomedical Part Numbers: US/2238562;
Schuko/769422; UK/2238570; Australia/658641)
⇒ An accessories kit containing the following items:
⇒ One bacterial filter for external connection to the flow ports P/N 2133712
⇒ 4' Tubing 1/8" ID clear w/blue stripe P/N 2391848
⇒ Two 22 mm ID x 22 mm ID tubing adapters P/N 2133305
⇒ Two 22 mm OD x 22 mm OD tubing adapters P/N 2133291
⇒ Two tapered 15 mm OD x 22 mm OD tubing adapters P/N 2133269
⇒ Two tapered 15 mm OD x 15 mm OD tubing adapters P/N 2133278
⇒ Two tapered 15 mm ID x 15 mm ID tubing adapters P/N 2133284
⇒ Two narrow bore tubing adapters P/N 2133322
⇒ Two flexible 15 mm ID x 22 mm ID tubing adapters P/N 2133310
⇒ Two 1/4" NPT male to 1/8" ID tubing barb fitting (Nylon) P/N 2133240
⇒ Two luer to barb fittings P/N 2213679
Chapter 2

Installation

2-1