1 Open the front door.
2 Load the sample tray with sample vials as required.
3 Slide the sample tray into the autosampler so that the rear of the sample
4 Press the front of the sample tray down to secure the tray in the
NOT E
Figure 11
Installing the Autosampler
Sample Trays
Sample Trays
Installing the Sample Tray
tray is seated firmly against the rear of the sample-tray area.
autosampler.
If the thermostatted autosampler tray pops out of position the air channel
adapter is not correctly inserted.
Installing the Sample Tray
32