Follett Horizon Elite HCD710A Operation And Service Manual page 23

25. Install main housing insulation and shuttle insulation:
26. Apply a coat of petrol-gel to auger shaft.
27. Slide gear motor onto auger and install gear motor
bolts (1/2" wrench).
28. Use screwdriver to pry auger shaft foward, then
orient auger shaft to align with motor shaft keyway
(Fig. 28.1).
29. Install key fully into keyway (Fig. 28.2).
30. Install spacer, ensure that key is captured in slot.
HCD710A, HMD710A
Fig. 26
Fig. 27
3
Fig. 28
Fig. 29
APPLY
PETROL-GEL
2
1
23