Follett Horizon Elite HCD710A Operation And Service Manual page 22

21. Install rear shuttle insulation (Fig. 23.1) and slide
main housing (Fig. 23.2) onto auger.
22. Secure with three screws.
23. Install shuttle switch.
§ Align holes with pins (Fig. 24.1) and depress switch
button (Fig. 24.2) to clear shuttle tab.
24. Install shuttle drain tube and front feed water tube
(Fig. 25).
Note: Ensure water feed tube is inserted 5/8".
22
Fig. 23
2
Fig. 24
Fig. 25
1
HCD710A, HMD710A