Samsung SF-4500 Service Manual page 29

4-7-4 Carrier Ass'y
1. Before you disassemble the carrier ass'y, you
should remove:
– Printer Unit (see page 4-11)
2. Remove the cable holder. Remove the one screw
on the right side of the main frame, and remove
the spring. Then take out the carrier shaft.
Cable holder
Samsung Electronics
Carrier shaft
Head cable
4-7-6 Feed Roller Ass'y
1. Before you disassemble the feeder roller ass'y, you
should remove:
– Printer Unit (see page 4-11)
– Carrier Ass'y
– Base Frame Ass'y
2. Remove the bearing feed from the main frame.
Pull the feeder roller in the direction of arrow and
take it out.
Feed roller
Disassembly
Bearing feed
4-15