4-7-2 ASF Feeder Ass'y
1. Before you disassemble the ASF feeder ass'y, you
should remove:
– Rear Cover Ass'y (see page 4-3)
2. Unplug all connectors from the Main PBA and
remove the two screws shown below.
Samsung Electronics
4. Remove the one screw, then remove pick up shaft
from the ASF frame while pushing it to the right
to disengage the gear.
Pick up shaft
Note : When you reassemble the ASF feeder ass'y,
insure the harness in the line feed motor is not
pinched or shorted.
Disassembly
4-13