Panasonic KW9M User Manual page 60

Reset count value 2
Reset the count value 2.
Reset : [YES]
Not reset : [NO]
* In case of that [PM] is selected for power input type, it reset the electric power converted by pulse.
Reset log data
Reset all log data (monthly max. /min. value of measured value, max. demand, power quality
event).
Reset : [YES]
Not reset : [NO]
Version
You can check the software version.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
*It skips this item when [YES] is selected for reset all integral value.
*It skips this item when [YES] is selected for reset all integral value.
It displays the software version.
53
Press <ITEM/△>, <SHIFT/▽> to select.
[Set list] YES, NO (initial: NO)
Press <ITEM/△>, <SHIFT/▽> to select.
[Set list] YES, NO (initial: NO)