Panasonic KW9M User Manual page 44

Direction of integral power for pulse output (OUT1 OUT2)
Select the direction of power (import or export) for using as a threshold for pulse output when
unit for pulse output set to 'integral value'.
Stand-by power alarm (threshold) (OUT1 OUT2)
Set a ratio of current for rated current used for threshold to judge stand-by power.
Stand-by power alarm (pass time) (OUT1 OUT2)
Set pass time used for threshold to judge stand-by power.
After passing the setting time, it will judge as a stand-by power.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
* It is only when [AL-S] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.1 to 100.0% (initial:100.0)
Increase
decrease
* It is only when [AL-S] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0 to 9999 min. (initial: 0)
Increase
decrease
Press <ITEM/△>, <SHIFT/▽> to select.
[Set list] P(import), -P(export)
37
(initial: P)