2.4.2. Connecting the IR Receiver Extension Cable
The IR Receiver Extension Cable receives signals from the source device remote control
and sends them back to the source device.
Get the IR Receiver Extension Cable from the MyWirelessTV3 kit. The IR Receiver
1.
Extension Cable has a green connector.
Plug the green connector of the IR Receiver Extension Cable into the green IR Ext port
2.
on the back of the Receiver.
Remove the protective covering of the double-stick tape and attach the flat end of the IR
3.
Receiver Extension Cable to the front corner of the HDTV monitor's bezel or frame.
You should now be able to use the remote control of the source device from the location of
the HDTV monitor to which you are streaming content.
Note: The IR Receiver Extension Cable should be mounted in such a place that it is in line-
of-sight of the remote control.
8