ActionTec MWTV3TX User Manual page 6

• It glows steadily in green when it has paired with the Transmitter. It blinks fast in
orange while it is pairing with the Transmitter or when pairing fails.
• It blinks slowly in red while it is being upgraded. And it glows steadily in red when
the upgrade fails.
 MENU and SELECT buttons. The MENU and SELECT buttons are used together to
access the GUI menu. Pressing the MENU button selects an option, and pressing the
SELECT button saves the setting.
Note: You can access the GUI menu when the receiver has connected to the transmitter
or when the receiver has not paired with any transmitter.
 RESET button. The RESET button is used to assist firmware upgrade.
 USB port. The USB port is used to update firmware for the Receiver. See "Updating
MyWirelessTV3 Firmware" for more details.
 Power Port. The 5V DC / 2A power port is used to connect the Receiver to a power
source.
 HDMI Out to TV Port. The HDMI Out to TV port is used, via an HDMI cable, to connect
the Receiver to an HDMI-ready display, such as a high-definition TV.
 IR Ext Port. The IR Ext port is used to connect the IR Receiver cable, used to extend
the range of the source device's remote control (in conjunction with the IR Blaster cable
connected to the Transmitter).
Note: The use of the IR Receiver Extension Cable is optional.
4