Part III.
This chapter describes using the MyWirelessTV3 graphical user interface, which allows you
to configure various aspects of MyWirelessTV3, including viewing system information,
selecting a Wi-Fi channel.
3.1. Viewing System Information
To access MyWirelessTV3's system information, press the MENU button on the Receiver
when the Receiver has paired with the Transmitter.
System information, such as firmware version, IP address, MAC address, resolution, Wi-Fi
channel, and signal strength, are displayed on the connected display.
Version: It indicates the firmware versions of the transmitter and receiver.
IP Address: It indicates the IP addresses of the transmitter and receiver.
MAC Address: It indicates the MAC addresses of the transmitter and receiver.
Resolution: It indicates the maximum resolution of display that is connected to the
transmitter and the maximum resolution of display that is connected to the receiver.
Wi-Fi Channel: It indicates the Wi-Fi channels on which the transmitter and receiver are
using.
Signal strength: It indicates the strength of Wi-Fi signal between the receiver and the
transmitter. The more blue bars display, the stronger the signal is.
Configuring MyWirelessTV3
9