Endress+Hauser Cerabar M PMP51 Owner's Manual
  1. Manuals
  2. Brands
  3. Endress+Hauser Manuals
  4. Transmitter
  5. Cerabar M PMP51
  6. Owner's manual

Endress+Hauser Cerabar M PMP51 Owner's Manual

Pressure transmitters
Hide thumbs Also See for Cerabar M PMP51:
Table of Contents

Advertisement

Quick Links

See also: Technical Information
TI00436P/00/EN/19.14
No. 71260300
Products
Technical Information
Cerabar M
PMC51, PMP51, PMP55

Process pressure measurement

Pressure transmitter with ceramic and
metallic sensors
Application
The device is used for the following measuring tasks:
• Absolute pressure and gauge pressure measurement in gases, steams or liquids in all
areas of process engineering and process measurement technology
• Level, volume or mass measurements in liquids
• High process temperature
– without diaphragm seals up to 130 °C (266°F), for a maximum of 60 minutes
150 °C (302°F)
– with diaphragm seals up to 400 °C (752°F)
• High pressure up to 400 bar (6000 psi)
• International usage thanks to a wide range of approvals
Your benefits
• Very good reproducibility and long-term stability
• High reference accuracy: up to ±0.15%,
as PLATINUM version: ±0.075%
• Turn down up to 100:1
• Standardized platform for differential pressure, hydrostatics, and pressure
(Deltabar S – Deltapilot S – Cerabar S)
• Simple, fast commissioning through a user interface designed for real-world
applications
• Used for process pressure monitoring up to SIL2, certified to IEC 61508 Edition 2.0
and IEC 61511 by TÜV NORD
• New TempC diaphragm for diaphragm seals:
Minimum temperature effects, maximum diaphragm thickness and short recovery
times
• Device versions compliant with ASME-BPE
Solutions
Services

Advertisement

Table of Contents
loading

Related Manuals for Endress+Hauser Cerabar M PMP51

Summary of Contents for Endress+Hauser Cerabar M PMP51

  • Page 1: Process Pressure Measurement

    Products Solutions Services TI00436P/00/EN/19.14 No. 71260300 Technical Information Cerabar M PMC51, PMP51, PMP55 Process pressure measurement Pressure transmitter with ceramic and metallic sensors Application The device is used for the following measuring tasks: • Absolute pressure and gauge pressure measurement in gases, steams or liquids in all areas of process engineering and process measurement technology •...

  • Page 2: Table Of Contents

    ........46 Long-term stability ........27 Endress+Hauser...
  • Page 3 Applications ......... 99 Endress+Hauser...

  • Page 4: Document Information

    A connection that has to be connected to the plant grounding system: This may be a potential equalization line or a star grounding system depending on national or company A0011201 codes of practice. Tool symbols Symbol Meaning Phillips head screwdriver A0011219 Flat-blade screwdriver A0011220 Torx screwdriver A0013442 Hexagon wrench A0011222 Allen screw A0011221 Endress+Hauser...
  • Page 5 1, 2, 3, 4 etc. Numbering for main items , ... Series of steps A, B, C, D etc. Views A-A, B-B, etc. Sections Hazardous area Indicates the hazardous area. A0011187 Safe area (non-hazardous area) Indicates the non-hazardous area. A0011188 Endress+Hauser...

  • Page 6: Terms And Abbreviations

    • URV – LRV = 0.6 bar (9 psi) A0016451 This span is based on the zero point. Example: 1 bar (15 psi) measuring cell Set span Span based on zero point Nominal value  upper range limit (URL) Nominal measuring range Sensor measuring range Endress+Hauser...

  • Page 7: Function And System Design

    PVDF connection minimum oil volume – For extreme medium – Special cleaning of the transmitter to – Gas-tight, elastomer-free temperatures remove paint-wetting substances, for – Process connections with use in paint shops minimum oil volume – Completely welded versions Endress+Hauser...

  • Page 8: Measuring Principle

    Advantages: • Can be used for process pressure up to 400 bar (6000 psi) • High long-term stability • Guaranteed overload resistance up to 4 times the nominal pressure • Significantly less thermal effect compared to diaphragm seal systems Endress+Hauser...

  • Page 9: Level Measurement (Level, Volume And Mass)

    • Choice of diverse level units • Has a wide range of uses, even in the following cases: – in the event of foam formation – in vessels with agitators or screen fittings – in the event of liquid gases Endress+Hauser...

  • Page 10: Electrical Differential Pressure Measurement With Gauge Pressure Sensors

    • 4 to 20 mA with HART communication protocol • PROFIBUS PA – The Endress+Hauser devices meet the requirements of the FISCO model. – Due to the low current consumption of 11 mA ± 1 mA, the following number of devices can be operated on one bus segment if installing as per FISCO: –...

  • Page 11: Input

    +10 (+150) 0.5 (7.5) 26.7 (400.5) 40 (600) 40 bar (600 psi) +40 (+600) 2 (30) 40 (600) 60 (900) Factory calibration turn down: Max 20:1, higher on request or configurable in the device. Product Configurator, "Sensor range" ordering feature Endress+Hauser...
  • Page 12 The vacuum resistance applies to the measuring cell at reference conditions. The pressure and temperature application limits of the selected filling oil must also be observed for the PMP55.  ä 101, "Diaphragm seal filling oils" ordering feature. Product Configurator, "Sensor range" ordering feature Endress+Hauser...

  • Page 13: Output

    Power supply 11.5 to 30 V DC for intrinsically safe device versions Power supply 11.5 to 45 V DC (versions with plug-in connector 35 V DC) for other types of protection and for uncertified device versions Maximum load resistance Lmax Supply voltage Endress+Hauser...

  • Page 14: Resolution

    • Acyclic: max. 3/s, typical 1/s (depends on command # and number of preambles) • Cyclic (Burst): max. 3/s, typical 2/s The Cerabar M commands the BURST MODE function for cyclic value transmission via the HART communication protocol. Cycle time (update time) Cyclic (Burst): min. 300 ms Endress+Hauser...

  • Page 15: Dynamic Behavior: Profibus Pa

    • Via on-site display, handheld terminal or PC with operating program, continuous from 0...999 s • Via DIP-switch on the electronic insert, switch position "on" (= set value) and "off" (= damping switched off) • Factory setting: 2 s Endress+Hauser...

  • Page 16: Firmware Version

    Output values Measured values for PV (über Analog Input Function Block) • Pressure • Flow • Level • Tank content Measured values for SV • Pressure • Temperature Input values Input value sent from PLC, can be shown on display Endress+Hauser...
  • Page 17 Number of Link Objects in VFD Number of FB-Schedule Objects Virtual communication references (VCRs) Permanent Entries Client VCRs Server VCRs Source VCRs Sink VCRs Subscriber VCRs Publisher VCRs Link settings Slot time Min. inter PDU delay Max. response delay Endress+Hauser...
  • Page 18 The Signal Characterizer Block has two sections, 40 ms Standard Characterizer each with an output that is a non-linear function Block of the respective input. The non-linear function is generated by a single look-up table with 21 arbitrary x-y pairs. Endress+Hauser...
  • Page 19 Additional function block information: Instantiate Function Block Number of instantiate blocks Endress+Hauser...

  • Page 20: Power Supply

    11.5 to 45 V DC (versions with plug-in connection 35 V DC) • Devices without certificate Taking 4 to 20 mA test signal A 4 to 20 mA test signal may be measured via the test terminals without interrupting the measurement. Endress+Hauser...

  • Page 21: Current Consumption

    FM/ CSA IS ATEX II1/2D Ex t, II1/2GD Ex ia, II3G Ex nA, Metal M20x1.5 (Ex e) 7 to 10.5 mm (0.28 to 0.41 in) IEC Ex t Da/Db For other technical data, see the housing section  ä 41 ff". Endress+Hauser...

  • Page 22: Connector

    Electrical connection for devices with Harting plug Han7D View of the connection on the device Material: CuZn, gold-plated contacts of plug-in jack and connector Connecting the cable version – A0019991 rd = red bk = black gnye = green 4 to 20 mA Endress+Hauser...

  • Page 23: Cable Specification

    Not assigned Signal – Earth A0011175 Endress+Hauser offers the following accessories for devices with an M12 plug: Plug-in jack M 12x1, straight • Material: body PA; coupling nut CuZn, nickel-plated • Degree of protection (fully locked): IP66/67 • Order number: 52006263 Plug-in jack M 12x1, elbowed •...

  • Page 24: Start-Up Current

    For details refer to TI001013KEN, XA01003KA3 and BA00304KA2. Ordering information: Product Configurator, "Mounted accessories" ordering feature, option NA A0023111 Without direct shield grounding With direct shield grounding Incoming connection cable HAW569-DA2B Unit to be protected Connection cable Endress+Hauser...

  • Page 25: Performance Characteristics Of The Ceramic Process Isolating Diaphragm

    The smallest expanded uncertainty of measurement that can be returned by our standards is: for small absolute pressure • 0.4% of the measured value in the range of 1 to 30 mbar ranges • 1% of the measured value in the range < 1 mbar. Endress+Hauser...

  • Page 26: Reference Accuracy - Pmc51

    1 bar (15 psi), 2 bar (30 psi), (4 to 20 mA) 0.5 + 0.35 x TD 0.3 + 0.15 x TD 0.525 + 0.525 x TD 4 bar (60 psi), 10 bar (150 psi), 40 bar (600 psi) Endress+Hauser...

  • Page 27: Total Performance - Pmc51

    > 1 bar (15 psi) ±0.1 % ±0.25 % ±0.4 % For devices with hygienic process connections: Measuring range Long-term stability of URL / 1 year  1 bar (15 psi) ±0.35 % > 1 bar (15 psi) ±0.2 % Endress+Hauser...

  • Page 28: Total Error - Pmc51

    1 bar (15 psi), 2 bar (30 psi), 4 bar (60 psi), 10 bar (150 psi), ±0.9 40 bar (600 psi) Warm-up period • 4 to 20 mA analog: 1.5 s • 4 to 20 mA HART: 5 s • PROFIBUS PA: 8 s • FOUNDATION Fieldbus: 20 s (after a TOTAL-reset 45 s) Endress+Hauser...

  • Page 29: Performance Characteristics Of The Metallic Process

    The smallest expanded uncertainty of measurement that can be returned by our standards is: for small absolute pressure • 0.4% of the measured value in the range of 1 to 30 mbar ranges • 1% of the measured value in the range < 1 mbar. Endress+Hauser...

  • Page 30: Reference Accuracy - Pmp51, Pmp55

    • TD 1:1 to TD 10:1 = ±0.15 % 100 bar (1500 psi) • TD >10:1 to TD 20:1 = ±0.2 % • TD 1:1 to TD 5:1 = ±0.15 % 400 bar (6000 psi) • TD >5:1 to TD 20:1 = ±(0.03 % x TD) Endress+Hauser...

  • Page 31: Thermal Change In The Zero Output And The Output Span - Pmp51 And Pmp55

    ±(0.3 + 0.25 x TD) ±(0.4 + 1.1 x TD) (4 to 20 mA) 2 bar (30 psi), 4 bar (60 psi), ±(0.3 + 0.2 x TD) ±(0.4 + 0.5 x TD) 10 bar (150 psi), 40 bar (600 psi) Endress+Hauser...

  • Page 32: Total Performance - Pmp51

    Long-term stability of URL / 1 year  1 bar (15 psi) ±0.25 % > 1 bar...10 bar ±0.1 % (15...150 psi) PMP51 40 bar (600 psi) ±0.1 % 100 bar (1500 psi) ±0.1 % 400 bar (6000 psi) ±0.1 % Endress+Hauser...

  • Page 33: Total Error - Pmp51

    ±0.55 400 bar (6000 psi) ±0.5 Warm-up period • 4 to 20 mA analog: 1.5 s • 4 to 20 mA HART: 5 s • PROFIBUS PA: 8 s • FOUNDATION Fieldbus: 20 s (after a TOTAL-reset 45 s) Endress+Hauser...

  • Page 34: Installation

    – PMP55 Wall and pipe mounting Endress+Hauser offers a mounting bracket for installing the device on pipes or walls. The mounting bracket is • included in the delivery for devices with a separate housing (available for order via feature 600) •...

  • Page 35: Separate Housing" Version

    • Minimum bending radius: 120 mm (4.72 in) • Cable extraction force: max. 450 N (101 lbf) • Resistance to UV light Use in hazardous area: • Intrinsically safe installations (Ex ia/IS) • FM/CSA IS: for Div.1 installation only Endress+Hauser...

  • Page 36: Oxygen Applications

    The resistance of the materials used must be checked before the materials are used in the medium. Ultrapure gas applications Endress+Hauser also provides devices which have been cleaned of oil and grease for special (PMC51 and PMP51) applications, such as for ultrapure gas. No special restrictions regarding the process conditions apply to these devices.

  • Page 37: Environment

    For high-temperature applications, either a PMP55 with a temperature isolator or with a capillary can be used. If vibrations also occur in the application, Endress+Hauser recommends you use a PMP55 with a capillary. If a PMP55 with a temperature isolator or capillary is used, we recommend a suitable bracket for mounting (see "Wall and pipe mounting"...

  • Page 38: Electromagnetic Compatibility

    • Electromagnetic compatibility as per all the relevant requirements of the EN 61326 series and compatibility NAMUR Recommendation EMC (NE21). Details can be found in the Declaration of Conformity (in the Download area of "www.de.endress.com", "search area - Approvals and Certificates", "Manufact. Declaration"). • Maximum deviation: < 0.5 % of span Endress+Hauser...

  • Page 39: Process

    +5 to +150 °C (+41 to +302°F)  VMQ Silicone -35 to +85 °C (-31 to +185°F) -20 to +85 °C (-4 to +185°F) Product Configurator, "Seal" ordering feature With "HB" option, see Product Configurator, "Service" ordering feature Suitable for foods FDA 21 CFR 177.2600 Endress+Hauser...

  • Page 40: Pressure Specifications

    Internal temperature compensation is faster the smaller the jump in temperature and the longer the time interval involved. For further information please contact your local Endress+Hauser Sales Center. PMP51 (with metallic process isolating diaphragm) Description...

  • Page 41: Mechanical Construction

    Cover with viewing window Cover without viewing window Front view, left-hand side view, top view Material Weight kg (lbs) Option With display Without display Aluminum 1.1 (2.43) 1.0 (2.21) Aluminum with glass viewing window Product Configurator, "Housing" ordering feature Endress+Hauser...

  • Page 42: F15 Housing, Stainless Steel (Hygienic)

    Front view, left-hand side view, top view Material Weight kg (lbs) Option With display Without display Stainless steel Stainless steel with glass viewing window 1.1 (2.43) 1.0 (2.21) Stainless steel with plastic viewing window Product Configurator, "Housing" ordering feature Endress+Hauser...

  • Page 43: Diaphragm

    Product Configurator, “Process connection” ordering feature Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...

  • Page 44: Diaphragm

    Product Configurator, “Process connection” ordering feature Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...

  • Page 45: Diaphragm

    JIS B0202 G ½" (male) AISI 316L 0.63 (1.39) JIS B0203 R ½" (male) Product Configurator, “Process connection” ordering feature PMC51: process connections F31 housing F15 housing with internal process 89 mm (3.5 in) 81 mm (3.2 in) isolating diaphragm - height H Endress+Hauser...

  • Page 46: Pmc51: Process Connections With Flush-Mounted Process

    Engineering unit mm (in) Height H  ä 47 Item Designation Material Weight kg (lbs) Option Thread ISO 228 G 1 ½" A AISI 316L 0.63 (1.39) Thread ISO 228 G 2" A AISI 316L Product Configurator, “Process connection” ordering feature Endress+Hauser...

  • Page 47: Pmc51: Process Connections With Flush-Mounted Process Isolating Diaphragm

    CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. PMC51: process connections F31 housing F15 housing with flush-mounted process 89 mm (3.5 in) 81 mm (3.2 in) isolating diaphragm - height H Endress+Hauser...

  • Page 48: Pmc51: Process Connections With Flush-Mounted Process Isolating Diaphragm

    Mount only with mounting bracket. MWP 10 bar (150 psi), OPL max. 15 bar (225 psi). Process temperature range –10 to +60 °C (+14 to +140°F). ECTFE coating on AISI 316L (1.4404). When operating in hazardous areas, avoid electrostatic charging of the plastic surfaces. Endress+Hauser...

  • Page 49: Pmc51: Process Connections With Flush-Mounted Process Isolating Diaphragm

    Mount only with mounting bracket. MWP 10 bar (150 psi), OPL max. 15 bar (225 psi). Process temperature range –10 to +60 °C (+14 to +140°F). Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...

  • Page 50: Pmc51: Process Connections With Flush-Mounted Process Isolating Diaphragm

    10 K 3.3 (7.28) (1.4435) 100 A 10 K 4.4 (9.7) Product Configurator, “Process connection” ordering feature PMC51: process connections F31 housing F15 housing with flush-mounted process 89 mm (3.5 in) 81 mm (3.2 in) isolating diaphragm - height H Endress+Hauser...

  • Page 51: Pmc51: Hygienic Process Connections With Flush-Mounted

    0.76 μm (30 μin). CSA approval: Product Configurator, “Approval” ordering feature Product Configurator, “Process connection” ordering feature Endress+Hauser supplies these slotted nuts in stainless steel AISI 304 (DIN/EN material number 1.4301) or in AISI 304L (DIN/EN material number 1.4307). Endress+Hauser...
  • Page 52 CSA approval: Product Configurator, “Approval” ordering feature Product Configurator, “Process connection” ordering feature Endress+Hauser supplies these slotted nuts in stainless steel AISI 304 (DIN/EN material number 1.4301) or in AISI 304L (DIN/EN material number 1.4307). Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device.
  • Page 53 0.76 μm (30 μin). Product Configurator, “Process connection” ordering feature Endress+Hauser supplies these slotted nuts in stainless steel AISI 304 (DIN/EN material number 1.4301) or in AISI 304L (DIN/EN material number 1.4307). 4 screws DIN912 M8 x 45 are enclosed (material A4-80)
  • Page 54 Delta ferrite content <1 %. The roughness of the surface in contact with the medium is R 0.76 μm (30 μin). Product Configurator, “Process connection” ordering feature Endress+Hauser supplies the slotted nuts in stainless steel AISI 304 (DIN/EN material number 1.4301) or in AISI 304L (DIN/EN material number 1.4307). Endress+Hauser...
  • Page 55 The roughness of the surface in contact with the medium is R 0.76 μm (30 μin). Endress+Hauser supplies these slotted nuts in stainless steel AISI 304 (1.4301) or in AISI 304L (1.4307). EHEDG or 3A approval only with approved process connection.

  • Page 56: Diaphragm

    DIN 13 threaded connection ø11.4 (0.45) ø17.5 (0.69) M20x1.5 A0021609 Engineering unit mm (in) Designation Material Weight kg (lbs) Option DIN 13 M20 x 1.5, EN 837 AISI 316L 0.6 (1.32) Bore 11.4 mm (0.45 in) Product Configurator, “Process connection” ordering feature Endress+Hauser...

  • Page 57: Diaphragm

    Product Configurator, “Process connection” ordering feature Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...

  • Page 58: Pmp51: Process Connections With Flush-Mounted Process Isolating Diaphragm

    Alloy C276 (2.4819) Thread ISO 228 G 1" A AISI 316L 0.7 (1.54) Thread ISO 228 G 1½" A AISI 316L 1.1 (2.43) Thread ISO 228 G 2" A AISI 316L 1.5 (3.31) Product Configurator, “Process connection” ordering feature Endress+Hauser...

  • Page 59: Pmp51: Process Connections With Flush-Mounted Process Isolating Diaphragm

    Product Configurator, “Process connection” ordering feature Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...

  • Page 60: Pmp51: Process Connections With Flush-Mounted Process Isolating Diaphragm

    Designation as per DIN 2527 in brackets With these process connections the raised face is smaller than described in the standard. Due to the smaller raised face a special seal must be used. Contact a seal manufacturer or your local Endress+Hauser Sales Center. Endress+Hauser...

  • Page 61: Pmp51: Process Connections With Flush-Mounted Process Isolating Diaphragm

    With these process connections the raised face is smaller than described in the standard. Due to the smaller raised face a special seal must be used. Contact a seal manufacturer or your local Endress+Hauser Sales Center. Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device.

  • Page 62: Pmp51: Hygienic Process Connections With Flush-Mounted Process Isolating Diaphragm

    0.76 μm (30 μin). Version optionally in conformity with ASME-BPE for use in biochemical processes, wetted surfaces R 0.38 μm (15 μin), electropolished; to be ordered using order feature 570 "Service", option "HK" in the order code. Product Configurator, “Process connection” ordering feature Endress+Hauser...
  • Page 63 0.76 μm (30 μin). Version optionally in conformity with ASME-BPE for use in biochemical processes, wetted surfaces R 0.38 μm (15 μin), electropolished; to be ordered using order feature 570 "Service", option "HK" in the order code. Product Configurator, “Process connection” ordering feature Endress+Hauser...
  • Page 64 0.76 μm (30 μin). Version optionally in conformity with ASME-BPE for use in biochemical processes, wetted surfaces R 0.38 μm (15 μin), electropolished; to be ordered using order feature 570 "Service", option "HK" in the order code. Product Configurator, “Process connection” ordering feature Endress+Hauser...
  • Page 65 0.76 μm (30 μin). Version optionally in conformity with ASME-BPE for use in biochemical processes, wetted surfaces R 0.38 μm (15 μin), electropolished; to be ordered using order feature 570 "Service", option "HK" in the order code. Product Configurator, “Process connection” ordering feature Endress+Hauser...

  • Page 66: Pmp51: Process Connections

    Product Configurator, “Process connection” ordering feature Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...

  • Page 67: Pmp55 Basic Device - Examples

    Process connections with capillary tubes are 40 mm (1.57 in) higher than process connections without capillary tubes Engineering unit mm (in) Diaphragm seal connection Designation Option Direct Temperature isolator ..m capillary ..ft capillary Product Configurator, “Diaphragm seal connection” ordering feature Endress+Hauser...

  • Page 68: Pmp55: Process Connections With Flush-Mounted Process Isolating Diaphragm

    • When using high-temperature oils the design can deviate significantly. • Observe the information in the "Planning instructions for diaphragm seal systems" ordering feature  ä 99 ff. • For further information please contact your local Endress+Hauser Sales Center. Diaphragm seal cell structure (Pancake) A0021635...

  • Page 69: Pmp55: Process Connections With Flush-Mounted Process Isolating Diaphragm

    28 mm (1.1 in) in conjunction with high-temperature oil Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...

  • Page 70: Pmp55: Process Connections With Flush-Mounted Process Isolating Diaphragm

    Alternatively available with TempC diaphragm. With TempC diaphragm Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...

  • Page 71: Pmp55: Process Connections With Flush-Mounted Process Isolating Diaphragm

    3.1 and pressure test according to Pressure Equipment Directive, Category II Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...

  • Page 72: Pmp55: Hygienic Process Connections With Flush-Mounted Process Isolating Diaphragm

    Product Configurator "Service" ordering feature, option HK. In combination with the option "electropolished", the wetted parts of the Varivent connection are made of 316L (1.4435) with a delta-ferrite content of < 1% (welding seams excluded). Alternatively available with TempC diaphragm. Endress+Hauser...

  • Page 73: Pmp55: Hygienic Process Connections With Flush-Mounted Process Isolating Diaphragm

    ASME-BPE ) PN 25 Rd 70 – 1/6 1.05 (2.32) EHEDG, 3A, ASME-BPE 0.76 m (29.9 in) as standard. Surface roughness of the surfaces in contact with the medium R Product Configurator, “Process connection” ordering feature With TempC diaphragm Endress+Hauser...
  • Page 74 1 ½ PN 40 2" – 1/8" 0.6 (1.32) PN 40 2 ½" – 1/8" 1.1 (2.43) Surface roughness of the surfaces in contact with the medium R 0.8 m (31.5 in) as standard. Product Configurator, “Process connection” ordering feature Endress+Hauser...

  • Page 75: Pmp55: Hygienic Process Connections With Flush-Mounted Process Isolating Diaphragm

    PN 16 53.7 1.7 (3.75) EHEDG, 3A, ASME-BPE DN 50 65.7 2.2 (4.85) EHEDG, 3A, ASME-BPE  0.8 μm (31.5 μin) as standard. Surface roughness of the surfaces in contact with the medium R Product Configurator, “Process connection” ordering feature Endress+Hauser...
  • Page 76 Rd 110 x 1/4" 26 2.55 (5.62) EHEDG, 3A, ASME-BPE Surface roughness of the surfaces in contact with the medium R  0.76 m (29.9 in) as standard. Product Configurator, “Process connection” ordering feature With TempC diaphragm Alternatively available with TempC diaphragm. Endress+Hauser...
  • Page 77  0.76 μm (29.9 μin) as standard. Surface roughness of the surfaces in contact with the medium R Product Configurator, “Process connection” ordering feature With TempC diaphragm Temperature application range -10 °C to +200 °C (14 °F to +392 °F) Endress+Hauser...
  • Page 78 0.38 μm (15 μin), electropolished; ordering information: Product Configurator, "Service" ordering feature, option "HK". Endress+Hauser supplies these slotted nuts in stainless steel AISI 304 (1.4301) or in AISI 304L (1.4307). EHEDG or 3A approval only with approved process connection. Product Configurator, “Process connection” ordering feature Molded seal FDA 21CFR177.2600/USP Class VI-70C, EHEDG, 3A, spare part no.: 52023572...

  • Page 79: Pmp55: Process Connections With Flush-Mounted Process Isolating Diaphragm

    In the case of process isolating diaphragms made of Alloy C, Monel or tantalum, the flange raised face is made of the same material as the process isolating diaphragm. Product Configurator, “Process connection” ordering feature Designation as per DIN 2527 in brackets Endress+Hauser...
  • Page 80 [mm] [kg (lbs)] DN 50 PN 10-40 50 / 100 / 200 48.3 3.2 (7.1)/ 3.8 (8.4)/ 4.4 (9.7) DN 80 PN 10-40 50 /100 / 200 6.2 (13.7)/ 6.7 (14.8)/ 7.8 (17.2) Product Configurator, “Process connection” ordering feature Endress+Hauser...

  • Page 81: Pmp55: Process Connections With Flush-Mounted Process Isolating Diaphragm

    Product Configurator, “Process connection” ordering feature Some device versions have CRN approval. A CRN-approved process connection with a CSA approval must be ordered for a CRN-approved device. These devices are fitted with a separate plate bearing the registration number 0F10525.5C. Endress+Hauser...
  • Page 82 2 (50.8) / 4 (101.6) / 6 (152.4) / 8 (203.2) 3.7 (94) 8.6 (19) / 9.9 (21.8) / 11.2 (24.7) / 12.4 (27.3) 2 (50.8) / 4 (101.6) / 6 (152.4) / 8 (203.2) 3.7 (94) 13.1 (28.9)/ 14.4 (31.6)/ 15.7 (34.6)/ 16.9 (37.3) Product Configurator, “Process connection” ordering feature Endress+Hauser...
  • Page 83 Ra 0.8 m (31.5 in). Lower surface roughness available on request. In the case of process isolating diaphragms made of Alloy C, Monel or tantalum, the flange raised face is made of the same material as the process isolating diaphragm. Product Configurator, “Process connection” ordering feature Endress+Hauser...

  • Page 84: Pmp55: Process Connections With Flush-Mounted Process Isolating Diaphragm

    [bar (psi)] pressure [kg (lbs)] Welded, ISO 228 G ½ A EN837 PN 160  160 (2320) AISI 316L 1.43 (3.15) Welded, ANSI ½ MNPT PN 160 Product Configurator, “Process connection” ordering feature CSA approval: Product Configurator, “Approval” ordering feature Endress+Hauser...
  • Page 85 Threaded, ISO 228 G ½ B EN837, > 40 (580) PN 400 with integrated seal lip AISI 316L (1.4404), 4.75 (10.47) screws made of 1.4571 Threaded, ANSI ½ MNPT, > 40 (580) PN 400 with integrated seal lip Product Configurator, “Process connection” ordering feature Endress+Hauser...

  • Page 86: Wall And Pipe Mounting With Mounting Bracket

    Option Housing (F31 or F15) Mounting bracket Dimensions with F31 housing  ä 41 ff 0.5 kg (1.10) Dimensions with F15 housing Product Configurator, "Separate housing" ordering feature Also available for order as a separate accessory: part number 71102216 Endress+Hauser...

  • Page 87: Reduction In Installation Height

    If the separate housing is used, the mounting height of the process connection is reduced compared to height the dimensions of the standard version. r ³ 120 (4.72) r ³ 120 (4.72) ø54.1 (2.13) A0023601 Process connection adapter Engineering unit mm (in) Endress+Hauser...

  • Page 88: Materials Not In Contact With Process

    Seal of cable gland and blind plug EPDM/NBR Cable gland Polyamide (PA), for dust ignition-proof: CuZn nickel- plated Blind plug PBT-GF30 FR for dust ignition-proof, Ex d, FM XP and CSA XP: AISI 316L (1.4435) Cover clamp Clamp AISI 316L (1.4435), screw A4 Endress+Hauser...
  • Page 89 Pressure compensation filter AISI 316L (1.4404) and PBT-FR Pressure compensation filter, O-ring VMQ or EPDM Nameplates lasered Cable gland Polyamide (PA), for dust ignition-proof: CuZn nickel-plated Seal of cable gland and blind plug NBR/Silicone/EPDM Sealing ring EPDM Screw A4-50 Endress+Hauser...
  • Page 90 Process connection adapter for AISI 316L (1.4404) separate housing Capillary AISI 316 Ti (1.4571) Protective hose for capillary AISI 304 (1.4301) Fill fluid Designation Option PMP51 Option PMP55 Silicone oil Inert oil NSF-H1 synthetik oil according to FDA 21 CFR 178.3570 3 Endress+Hauser...

  • Page 91: Materials In Contact With The Process

    • "Clamp connections" and "Hygienic process connections" (see also "Ordering information" ordering feature): AISI 316L (DIN/EN material number 1.4435) • Endress+Hauser supplies process connections with threaded connections and DIN/ EN flanges made of stainless steel as per AISI 316L (DIN/EN material number 1.4404 (AISI 316) or 14435). With regard to their stability-temperature property, the materials 1.4404 and 1.4435 are grouped...
  • Page 92 EPDM, FDA, 3A Class II, USP Class VI, DVGW, KTW, W270, WRAS, ACS, NSF61 FFKM Kalrez 6375 FFKM Kalrez 7075 FFKM Kalrez 6221, FDA, USP Class VI Fluoroprene XP40, FDA, USP Class VI, 3A Class I VMQ Silicone, FDA Product Configurator, "Seal" ordering feature Endress+Hauser...

  • Page 93: Operability

    • Comprehensive diagnostic functions (fault and warning message, peak-hold indicators, etc.) – A0016498 Operating keys Bar graph Symbol Header Parameter ID number Ordering information: Product Configurator, "Output" ordering feature Endress+Hauser...
  • Page 94 Functions: • 8-digit measured value display including sign and decimal point, bar graph for 4 to 20 mA as current display. • Diagnostic functions (fault and warning message etc.) A0023993 Ordering information: Product Configurator, "Display, operation" ordering feature Endress+Hauser...
  • Page 95 DIP switch only for Deltabar M DIP switch for switching damping on/off Not used DIP switch for locking/unlocking parameters relevant to DIP switch for switching damping on/off the measured value DIP switch for locking/unlocking parameters relevant to the measured value Endress+Hauser...

  • Page 96: Operating Languages

    Profiboard or Proficard required  ä 97 ff FieldCare FieldCare is an Endress+Hauser asset management tool based on FDT technology. With FieldCare, you can configure all Endress+Hauser devices as well as devices from other manufacturers that support the FDT standard. FieldCare supports the following functions: •...
  • Page 97 Field Xpert is an industrial PDA with integrated 3.5" touchscreen from Endress+Hauser based on Windows Mobile. It offers wireless communication via the optional VIATOR Bluetooth modem or via WiFi and Endress+Hauser' s Fieldgate FXA520. Field Xpert also works as a stand-alone device for asset management applications. For details refer to BA00060S/00/EN.

  • Page 98: System Integration (Except Analog Electronics)

    Cerabar M PMC51, PMP51, PMP55 System integration (except The device can be given a tag name (max. 8 alphanumeric characters). analog electronics) Designation Option Measuring point (TAG), see additional spec. Bus address, see additional spec. Product Configurator, "Identification" ordering feature Endress+Hauser...

  • Page 99: Planning Instructions For Diaphragm Seal Systems

    ‣ To help you select the right diaphragm seal systems for your particular applications, Endress+Hauser provides its customers with the "Applicator Sizing Diaphragm Seal" selection tool, which is available free of charge at "www.endress.com/applicator" or can be ordered on a DVD.

  • Page 100: Function And Design

    The process pressure acts via the process isolating diaphragm of a diaphragm seal on the liquid-filled system, which transfers the process pressure to the sensor of the pressure transmitter. Endress+Hauser delivers all diaphragm seal systems as welded versions. The system is hermetically sealed, which ensures greater reliability.

  • Page 101: Diaphragm Seal Filling Oils

    Please refer to the "Applicator Sizing Diaphragm Seal" tool for the thermal change of the diaphragm seal and other important technical features. Product Configurator, “Fill fluid” ordering feature When simultaneously using the diaphragm seal systems at high process temperatures and low absolute pressures, Endress+Hauser recommends the vacuum service (Product Configurator, "Service" ordering feature, option "HG").

  • Page 102: Installation Instructions

    • Vibration-free (in order to avoid additional pressure fluctuations) • Not in the vicinity of heating or cooling lines • Insulate if the ambient temperature is below or above the reference temperature • With a bending radius of 100 mm (3.94 in). Endress+Hauser...
  • Page 103 Maximum permitted insulation height Insulation material Mounting with temperature isolator Endress+Hauser recommends the use of temperature isolators in the event of constant extreme medium temperatures which lead to the maximum permissible electronics temperature of +85 °C (+185°F) being exceeded. Depending on the filling oil used, diaphragm seal systems with temperature isolators can be used for maximum temperatures of up to 260 °C (+500°F).

  • Page 104: Vacuum Applications

    Cerabar M PMC51, PMP51, PMP55 Vacuum applications Mounting instructions For applications under vacuum, Endress+Hauser recommends mounting the pressure transmitter below the diaphragm seal. This prevents vacuum loading of the diaphragm seal caused by the presence of fill fluid in the capillary.

  • Page 105: Certificates And Approvals

    CE mark The device meets the legal requirements of the relevant EC directives. Endress+Hauser confirms that the device has been successfully tested by applying the CE mark. C-tick symbol The measuring system complies with the EMC requirements of the "Australian Communications and Media Authority (ACMA)".

  • Page 106: Crn Approvals

    Product Configurator, "Additional approval" ordering feature, option "LR" Classification of process Endress+Hauser instruments are designed according to ANSI/ISA 12.27.01 either as single seal or sealing between electrical dual seal devices with annunciation, allowing the user to waive the use and save the cost of installing...

  • Page 107: Calibration; Unit

    Oil and grease removed ) Cleaned for oxygen service ) Cleaned from PWIS (PWIS = paint wetting impairment substances) Configured min alarm current Configured HART Burst Mode PV Product Configurator, "Service" ordering feature Only device, not accessory or enclosed accessory Endress+Hauser...

  • Page 108: Ordering Information

    Ordering information Detailed ordering information is available from the following sources: • In the Product Configurator on the Endress+Hauser website: www.endress.com → Select country → Instruments → Select instrument → Product page function: Configure this product • From your Endress+Hauser Sales Center: www.endress.com/worldwide Product Configurator - the tool for individual product configuration •...
  • Page 109 Display 1st Value Display 2nd Value Display  Main Value  none (Default)  Main Value [%]  Pressure  Current [mA] (HART only)  Temperature Depending on sensor and comunication variant Damping Damping: __________ sec (Default 2 sec Endress+Hauser...

  • Page 110: Configuration Data Sheet (Analog Electronics)

    [pressure engineering unit] Display 1st Value Display 2nd Value Display  Main Value  none (Default) Depending on sensor and comunication variant Damping Damping: __________ sec (Default 2 sec) Smallest calibratable span (preset at the factory)  ä 11 ff. Endress+Hauser...

  • Page 111: Documentation

    Ex ia IIIC Da/Db PMC51   – 4 to 20 mA HART – XA00487P/00 Ex ia IIC Ga/Gb   PMC51, PMP51, PMP55 – 4 to 20 mA HART – XA00473P/00 Ex ia IIIC Da/Db Product Configurator, "Approval" ordering feature Endress+Hauser...

  • Page 112: Installation/Control Drawings

    FM/CSA IS + XP Cl.I, II Div.1 Gr.A-D/B-G PMP55  FM IS/FM XP Cl.I, II Div.1 Gr.A-G+ ― – 4 to 20 mA HART – In preparation CSA IS/XP Cl.I, II Div.1 Gr.A-G, Zone 1,2 Product Configurator, "Approval" ordering feature Endress+Hauser...

  • Page 113: Combination Certificate

    – 4 to 20 mA HART – XA00556P/00 + KEMA/ ATEX II 1/2G Ex ia IIC T6 + XA00536P/00 FM / CSA FM/CSA IS CL.I Div.1 Gr.A- D, FM/CSA: Zone 0,1,2 – PROFIBUS PA, – XA00564P/00 FOUNDATION Fieldbus Product Configurator, "Approval" ordering feature Endress+Hauser...

  • Page 114: Accessories

    400 (752) 120 (1740) 300 (572) 160 (2320) 120 (248) Connection thread [d] Material Option 1.0345 G ½" 316Ti (1.4571) RA22 BA22  NPT ½" 316Ti (1.4571) BB22 Product Configurator, "Accessory enclosed" ordering feature, option "P4". with 3.1 inspection certificate Endress+Hauser...

  • Page 115: Siphon - U-Shape

    (on process side) [°C (°F)] 104 (1508) 400 (752) 120 (1740) 300 (572) 160 (2320) 120 (248) Connection thread [d] Material Option G ½" 1.0345 RC11 NPT ½" 1.0345 RD11 Product Configurator, "Accessory enclosed" ordering feature, option "P4". Endress+Hauser...

  • Page 116: Shutoff Valve

    Weld-in tool adapter Uni D65/D85, Brass  ― ― Weld-in adapter Uni D85, 316L  ― ― Weld-in adapter Uni D85, 316L, 3.1 EN10204-3.1 material, inspection certificate  ― ― Product Configurator, "Accessories" ordering feature For dimensions and technical data see technical Information TI00426F/00. Endress+Hauser...

  • Page 117: Mounting Bracket For Wall And Pipe Mounting

     ä 23 ff M12 connector Registered trademarks HART® Registered trademark of the HART Communication Foundation, Austin, USA PROFIBUS® Registered trademark of the PROFIBUS User Organization, Karlsruhe, Germany FOUNDATION™ Fieldbus Registered trademark of the Fieldbus Foundation, Austin, Texas, USA Endress+Hauser...
  • Page 118 Cerabar M PMC51, PMP51, PMP55 Endress+Hauser...
  • Page 119 Cerabar M PMC51, PMP51, PMP55 Endress+Hauser...
  • Page 120 71260300 www.addresses.endress.com...

This manual is also suitable for:

Cerabar m pmc51Cerabar m pmp55

Table of Contents