Johnson Controls TEC2627-2 Installation Instructions And Operators Manual page 5

Tec26x7-2 series bacnet ms/tp networked thermostats with two outputs
Table of Contents

Advertisement

Room Temperature Control Thermostat
(Minimum and Maximum Position
Adjusted on Actuator)
Figure 6: Wiring the TEC2627-2 Thermostat for Floating Control
Room Temperature Control Thermostat
(Minimum and Maximum Position
Adjusted on Actuator)
Figure 7: Wiring the TEC2647-2 Thermostat for Proportional 0 to 10 VDC Control
Changeover
Room Temperature Control Thermostat
(Minimum and Maximum Position
Adjusted on Actuator)
Figure 8: Wiring the TEC2627-2 Thermostat for Floating Control
TEC26x7-2 Series BACnet® MS/TP Networked Thermostats with Two Outputs Installation Instructions
Floating
Actuator
(Pressure-Dependent VAV Cooling Only)
Proportional
Actuator
(Pressure-Dependent VAV Cooling Only)
Sensor
Floating
Actuator
(Pressure-Dependent VAV Heating/Cooling with Changeover)
UI3 COS
24 V~ Com
24 V~ Hot
BO1 Open
BO2 Close
0 to 10
VDC
UI3 COS
24 V~ Com
24 V~ Hot
AO1
Supply Air
Temperature Sensor
UI3 COS
24 V~ Com
24 V~ Hot
BO1 Open
BO2 Close
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tec2647-2

Table of Contents