Split Memory; Using Memory Tag; Using Memory Bank; Scanning Function - Yaesu FT-4XR Operating Manual

For additional details on the following functions, refer to the Advanced
Manual which may be downloaded from the Yaesu website.

Split Memory

Two different frequencies, one for receive and another for transmit, may be
stored in one memory channel.

Using Memory Tag

Memory name tags may be assigned to the memory channels and home
channels.

Using Memory Bank

The transceiver allows using up to 10 memory banks to allow sorting and
registering the channels in convenient groups.

Scanning Function

The transceiver supports the following four scanning functions:

VFO Scan

Programmed VFO Scan
Memory Channel Scan
Programmable Memory Scan (PMS)
Memory Bank Scan
For additional details on the Programmable Memory Scan (PMS) and
Memory Bank Scan, refer to the Advanced Manual which may be
downloaded from the Yaesu website.
VFO Scan
VFO scan function scans the frequencies, and detects signals.
1. Press the [ V/M] key to enter the VFO mode.
2. Press and hold the [] key or [] key to start
scanning.
3. Press the PTT switch, [▲] or [▼] key to cancel
scanning.
• If scanning is in operation when the transceiver is turned OFF, then when it is
turned ON again, scanning will resume instantly.
• To set the transceiver action when scanning stops, see "Setting the Receive
Operation When Scanning Stops" on page (
22
21).