Yaesu FT-4XR Operating Manual page 30

Set Mode
No.
item
28 RF SQL Adjusts the RF Squelch threshold level.
29 RPT.ARS Turns the ARS function on/off.
30 RPT.FRQ Sets the repeater shift width.
31 RPT.SFT Sets the repeater shift direction.
Selects the Receive mode Battery Saver
32 RXSAVE
interval ("sleep" ratio)
33 SCN.LMP Turns the scan lamp ON/OFF while paused.
34 SCN.RSM Configures the scan stop mode settings.
Turns the Memory Scan "Skip" channel
35 SKIP
selection mode ON/OFF.
Selects the Tone Encoder and/or Decoder
36 SQL.TYP
mode.
37 STEP Sets the frequency steps.
38 TN FRQ Sets the TONE frequency.
39 TOT Sets the timeout timer.
40 TX PWR Selects Transmitter Power
41 TX SAVE Turns the Transmit Battery Saver ON/OFF.
42 VFO.SPL Turns the "VFO Split" operation ON/OFF.
43 VOX Turns the VOX function ON/OFF.
Broadband FM Radio (WFM) function
44 WFM.RCV
Enables/Disables.
Sets the Transmit Modulation Level in the
45 W/N.DEV
FM mode.
46 WX ALT Turns the Weather Alert Scan ON/OFF.
(*): This function displays depending on the transceiver version.
28
Description
Selectable options
(Options in bold are the
default settings)
OFF / S-1 / S-2 / S-3 / S-4
/S-5 / S-6 / S-8 / S-FULL
ARS.ON / ARS.OFF
OFF / 0.025MHz −
99.975MHz
SIMPLX / +RPT / -RPT
200 MS − 2 SEC / OFF
ON / OFF
BUSY / HOLD / TIME
OFF / SKIP
OFF / R-TONE / T-TONE
/ TSQL / REV TN / DCS /
PAGER
AUTO /5.0 / 10.0 / 12.5 /
15.0 / 20.0 / 25.0 / 50.0 /
100.0 k
OFF / 67.0 R − 100.0 R −
254.1 R
OFF / 67.0 T − 100.0 T −
254.1 T
OFF / 1MIN − 3MIN −
30MIN
HIGH (5W) / MID (2.5W) /
LOW (0.5W)
SAVOFF / SAV ON
VSP.OFF / VSP. ON
VOXOFF/ VOX ON
WFM.ON / WFM.OFF
WIDE / NARROW
ALT.OFF / ALT. ON