Mp3 - Aux In; Volume; Headphone Jacks; Quick Start - Kurzweil Andante CUP 310 User Manual

Quick Start

Playing the Programs:
1. Turn on the power.
2. The Piano CATEGORY button LED is lit and the first Program (Piano) is ready to play.
3. There are a number of different Programs available. Press a CATEGORY button, then press the LEFT
or RIGHT navigation button to step through the available Programs in the selected category.
Playing a Demo Song:
1. Press the RECORD and PLAY/PAUSE buttons simultaneously to enter Demo Mode
2. The first demo song immediately plays.
When the current demo song finishes, the next song begins playing.
3. Press the LEFT or RIGHT navigation button to select the previous or next song.
4. You can also press PLAY/PAUSE and STOP buttons to start and stop the current demo.
5. To exit Demo Mode, press the EXIT button.
Introduction

MP3 - Aux In

Connects an external audio source to the CUP310
sound system.

Volume

Before turning on the CUP310, it's always a good idea to
set the volume at its minimum setting (all the way to the
left). For a generally comfortable level of volume while
playing, set the knob at its middle position.
The Volume Control is located on the right end of the
keyboard. Turn this knob from left to right (clock- wise) to
increase the volume. This adjusts the CUP310 speaker
and headphone audio volume. The Volume control does
not affect the volume of the sound coming from external
sources through the Audio In jacks on the rear panel.

Headphone Jacks

The CUP310 has two 1/4" stereo headphone jacks
located below the keyboard on the left end of the
cabinet.
Plugging in headphones provides privacy during
practice. Each jack operates the same so multiple
people can play and hear the music together. When
headphones are connected the CUP310's speakers are
silent.
page 4