Overview; Input/Output Panel - Kurzweil Andante CUP 310 User Manual

Overview

Input/Output Panel

The Input/Output panel is located on the rear of the instrument cabinet.
Audio In and Audio Out:
Audio Out (RCA jacks) may be used to connect the CUP310 to external audio equipment, such as an outboard mixer,
powered speakers, or recording device. Audio In jacks are used to connect the CUP310's internal speakers to other
devices such as a digital audio player or CD player. Always turn off the CUP310's power before plugging or unplugging
cables into the Audio In jacks. The CUP310's Volume Control does not affect the volume of the sound coming from the
Audio In jacks. Therefore it is best to use a device that has its own output level control and to use that to adjust the sound
volume from the external device.
MIDI In and Out ports:
Use the MIDI In and Out ports to connect the CUP310 to other MIDI devices to receive and send MIDI data.
CC Pedal (Volume/Expression Pedal):
This jack is used to connect a continuous controller pedal for volume and expression control.
The CUP310 requires a pedal with a TRS 1/4" connector and 10k linear potentiometer. Most manufacturers EXCEPT
Yamaha and Korg make pedals with the same specifications and should work. Yamaha and Korg pedals typically use
an exponential potentiometer and therefore will not work correctly. The CC-1 pedal is available from Kurzweil.
You can order the CC-1 through your local Kurzweil dealer.
USB:
Connect a USB cable to this port to send and receive MIDI or to connect to a computer to apply system updates.
page 5