Metronome/Rhythm Mode; Rhythm Pattern; Tempo - Kurzweil Andante CUP 310 User Manual

Metronome/Rhythm Mode

Press the MET/RHY/TAP button to enter Metronome/Rhythm Mode.
This mode allows you to select whether a Metronome and/or Rhythm will be played when the PLAY/PAUSE button
is pressed in Program Mode.
You can select a Rhythm Pattern, set the Rhythm and Metronome volume, and set when the Metronome will be heard.
While in Metronome/Rhythm Mode, press the UP or DOWN navigation buttons to select each parameter,
then press the LEFT or RIGHT navigation button to select the previous or next setting.
From the Metronome/Rhythm Mode menu, press the EXIT button to return to the previously selected mode.

Rhythm Pattern

When Rhythm Pattern is selected, press the RIGHT navigation button to open the Rhythm Pattern sub-menu.
The Rhythm Pattern sub-menu displays the currently selected Rhythm Pattern.
Press the LEFT or RIGHT navigation button to select the previous or next Rhythm Pattern.
Press the EXIT button to return to the Metronome/Rhythm Mode main menu.
Metronome
The Metronome parameter determines when the Metronome will be heard.
Press the LEFT or RIGHT navigation button to select the previous or next setting. When Metronome is set to On,
the Metronome will be heard whenever the PLAY/PAUSE button is pressed in Program Mode or Song Mode.
When Metronome is set to Off, the Metronome will not be heard. When Metronome is set to Rec Only, the
Metronome will be heard only while recording in Song mode.

Tempo

The Tempo parameter determines the tempo that the Metronome and Rhythm will use in Program Mode.
Press the LEFT or RIGHT navigation button to change the tempo in BPM (beats per minute).
You can also set the tempo by repeatedly tapping the MET/RHY/TAP button at the desired rate.
page 11