Chapter 12 Connection; Using Headphones; Aux In Out; Mp3 Aux In - Kurzweil m230 User Manual

Connection
Chapter 12

1. Using Headphones

Connect a pair of headphones to one of the phones jacks. Two phones jacks are provided.
You can connect two sets of standard stereo headphones. (If you are using one pair headphones, you can
plug them into either of these jacks).
Bottom surface
2. Audio In (Aux In)
You can connect the output jacks of an external device (such as CD player, tone generator) to the instrument's
Aux In jacks, letting you hear the sound of that device through the built in speakers of the instrument.
3. Audio Out (Aux Out)
You can connect a stereo system to amplify the instrument's sound by using the Aux Out jacks. When the
instrument's sound is output to an external device, first turn on the power to the instrument, then to the
external device. Reverse this order when you turn the power off.

4. MP3 Aux In

You can connect the output jack of an MP3 player or smart phone to the instrument's MP3 Aux In jack on the
right cheek block. Do not use Audio In and MP3 Aux In at the same time.
CAUTION
Do not use headphones at a high volume for an
extended time. Doing so many cause hearing loss.
Standard stereo
phone plug
MIDI
CAUTION
When you connect the cable to the piano, plase turn the piano's
power of first. Otherwise ,loud noise may occur while connecting
the cable.
.
.
Connection