Installing Option Modules; General Information On Installing Option Modules; Installing Optional Modules In The Standard And Intrinsically Safe Version - Siemens SIPART PS2 Operating Instructions Manual

4.6

Installing option modules

4.6.1

General information on installing option modules

Unsuitable device for the hazardous area
Risk of explosion.
● Only use equipment that is approved for use in the intended hazardous area and labelled
4.6.1.1

Installing optional modules in the standard and intrinsically safe version

Introduction
The following option modules are available for the positioner in the standard and intrinsically
safe version:
● Installing the position feedback module (Page 58)
● Installing the alarm module (Page 59)
● Installing the slit initiator alarm module (SIA) (Page 60)
● Installing the mechanical limit switch module (Page 63)
● Installing the internal NCS module 6DR4004-5L/-5LE (Page 67)
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
WARNING
accordingly.
Installing/mounting
4.6 Installing option modules
51