Battery Alarms; Connecting The Remote - Invacare LiNX DLX-REM110 User Manual

Battery charge state 4
Red, amber and one green LED on.
Fully charged
Green, green, amber, amber and red LEDs
on.
If the remote is powered off, the battery gauge does not indicate the
charging state. For more information about the charging state, refer
to the user manual of your charger.

3.11.1 Battery alarms

High voltage warning
The batteries are overcharged.
All LEDs on and the green LEDs flashing.
1. Disconnect the battery charger.
Low voltage warning
The batteries are empty.
1602969-B
Only one red LED on and flashing.
1. Switch the wheelchair off.
2. Charge the batteries immediately.

3.12 Connecting the remote

CAUTION!
Risk of unintended stops
If the plug of the remote cable is broken, the remote
cable may come loose while driving. The remote could
suddenly switch off when loosing power. This forces
an unintended stop.
– Always check the plug of the remote for damage.
Contact your provider immediately in case of a
damaged plug.
Risk of damage to the remote
The remote plug and connector socket fit together in
one way only.
– Do not force them together.
1. Lightly push to connect the plug of the remote cable and the
connector socket. The plug must lock in place with an audible
click.
Usage
23