Drop Ceiling Mount Using Mount Plate - Cisco Meraki MR52 Hardware Installation Manual

4.2.1.2 Drop Ceiling Mount Using Mount Plate

To mount your MR52 on a drop ceiling T-rail, use the included drop ceiling mounting accessory kit.
The accessory kit can be used to mount to most 9/16", 15/16" or 1 ½" T-rails.
The kit contains:
Dropped ceiling 6-32x4 mm screws 6-32x7 mm screws 2 rubber spacers
mounting clips Only used for Only used for
with set screws recessed rail mount recessed rail mount
(uncommon) (uncommon)
1. Attach the T-rail clips to the T-rail by rotating them and snapping them into place as shown.
The black foam pads should be compressed slightly after installation.
13