Customizing Rings And Message Indicators; Customizing The Phone Screen - Cisco 7960 Reference Manual

CUSTOMIZING RINGS AND MESSAGE INDICATORS

You can customize the way that your phone indicates an incoming call or a new voice mail message for each of your lines. Custom-
ized ring sounds and other indicators can help you quickly differentiate between multiple lines. For example, you can choose a chirp-
ing sound to indicate an incoming call on Line 1 and a drumbeat to indicate an incoming call on Line 2.
IF YOU WANT TO...
Change the ring sound
Change the ring pattern (flash-only, ring
once, beep-only, etc.)
Change the way that the voice message
light on your handset works

CUSTOMIZING THE PHONE SCREEN

You can adjust the contrast and the language for your phone screen.
IF YOU WANT TO...
Change the phone screen contrast
Change the language on your phone screen
SNET: CISCO 7940/7960 REFERENCE GUIDE
THEN...
Choose > Ring Type.
Select a phone line or the default ring setting. Use the
type. When you find a ring sound that you want, press
You can apply the default ring setting to a selected phone line by pressing Default.
Log in to your User Options web pages, select your device, then
Log in to your User Options web pages, select your device, then choose
Typically, the default system policy tells your phone to "always light" when you receive a new voice message.
THEN...
Choose > Contrast. Press Up,
Log in to your User Options web pages, select your device, then choose
Navigation button to scroll through the ring types. Press
Select, then press OK.
choose Change the Ring Settings
Change the Message Waiting Lamp
Down or , then press OK. Or press
Change the Locale...
REFERENCE
Play to hear the selected ring
for your phone from the main menu.
Policy... from the main menu.
Cancel to revert to the previously saved setting.
from the main menu.
Back to Table of Contents
i
15