Table of Contents
Advertisement
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL
NAME
V
Volts
A
Amperes
Hz
Hertz
W
Watt
min
Minutes
Alternating Current
n
No Load Speed
0
Class II Construction
.../min
Per Minute
Safety Alert
Eye Protection
Wet Conditions Alert
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations
with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any
danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
Important: Advises you of important information or instructions vital to the operation or maintenance of
the equipment.
Note: Advises you of additional information concerning the operation or maintenance of the equip-
ment.
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, suface speed, orbits etc., per minute
Precautions that involve your safety
Always wear safety goggles or safety glasses with side shields
and a full face shield when operating this product.
Do not expose to rain or use in damp locations.
5
Advertisement
Table of Contents
