Features; Product Specifications - RIDGID R7000 Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS

n Chuck Capacity .....1/16 in. (1.6 mm) to 3/8 in. (10 mm)
n Input....................... 120 V, 60 Hz, AC only, 6.5 Amperes
n No Load Speed........................................... 0-2500/min.
n Net Weight ............................................. 3.6 lbs. (1.6 kg)
Before using this product, familiarize yourself with all oper-
ating features and safety requirements. However, do not let
familiarity with the tool make you careless.
LIGHTED
KEYLESS CHUCK
FORWARD-REVERSE
PLUG
MOLDED BELT CLIP
LEVER
SWITCH
TRIGGER
Your new tool is equipped with the following features.
See Figure 1.
LEVEL AND BELT CLIP
Two convenient features provided on your drill are a level
and a belt clip. The level is recessed in the motor housing
on your drill. It can be used to keep drill bits level during
both horizontal and vertical drilling operations. The belt clip
is molded into the top of the motor housing on your drill.
LIGHTED PLUG
The lighted plug helps to easily identify live tools.
TOP VIEW OF LEVEL FOR
HORIZONTAL DRILLING
LEVEL
END VIEW OF LEVEL FOR
LOCK-ON
BUTTON
8
VERTICAL DRILLING
Fig. 1